Log In     My Account       Your cart is empty.     SKYPE

     English   English French German

Home >>  AC 110V 220V Remote Kits >>  1CH AC Latched Mode Kits >>  1 Channel ACV 110 220V Wireless Remote Switch - Transmitter & Receiver - Latched Control Mode

Stay In Touch

1 Channel ACV 110 220V Wireless Remote Switch - Transmitter & Receiver - Latched Control Mode

Price: Starting at: US $32.00

Add to Cart:    Write Review

  • Model: 0020008 (S1L-AC & C-2)

Please Choose:

This RF wireless remote control switch system is ideal for turn on / off the house lights, garage door, motors, electric locks, etc in the range of about 100 meters !  You just take this 2 buttons remote controller and you can easily control all DC 0-28V or AC110 ~ 240V electrical appliances at home!  Moreover, the remote control switch easy installation and use conveniently!  It should be a good choice for you. 

Video of Remote Control AC Lamp



  • Wireless control, easy to install.
  • Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz


  • Model No.: S1L-AC110 / S1L-AC220
  • Channel: 1 CH
  • Control Mode: Latched (Press -> On; Press other button -> Off)
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): AC100~120V (S1L-AC110), AC200~240V (S1L-AC220)
  • PCB size: 80mm x 35mm x 14mm
  • Case size: 100mm x 40mm x 24mm
  • Maximum Working Current: 3A


  • Model No.: C-2
  • Channel: 2 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) 


  • Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire.
  • Press button 1, turn on the lamp; Press button 2, turn off the lamp.


  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver about 4 seconds until signal LED turns off; then release the button, at this time all stored codes have been deleted successfully.
  • Learning the button of remote control:
    1) Press and hold the button of receiver about 2 seconds until signal LED flashes; then release the button, at this time the receiver enters into status of LEARNING.
    2) Press any one button on remote control. If signal LED immediately turns off, it means learning is successful.
    3) The receiver can learn several remote controls with different codes.

Package Include:

  • Receiver: S1L-AC110 / S1L-AC220 (1 Channel / Latched Control Mode)
  • Transmitter: C-2
  • User manual


  • The distance of 100m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance could not reach 100m. If you need longer range, you can choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here to link to; Or you can add the External Extend Antenna (model:0020909 ) on the receiver for improve the range - Click here to link to.
Ask A Question
* Required information