Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  RF Receiver / Controller >>  Mini Receiver >>  1 Channel DC 4-12V Small Motor RF Wireless Remote Receiver

Stay In Touch

1 Channel DC 4-12V Small Motor RF Wireless Remote Receiver


Price: Starting at: US $22.00

Add to Cart:    Write Review

  • Model: 0020644 (S1F1-DC)

Please Choose:












Feature:
Wireless control, easy to install
Control small motors with voltage DC 4~12V.
You can rotate the motor in the positive or reversal direction with the transmitter/remote controller from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
One/several transmitters can control one/several receivers simultaneously.

Receiver Parameters:
Model: 0020644
Type: S1F1-DC (4~12V)
Input/Output: DC 4~12V
Working Frequency: 315MHz
Control Modes: Momentary, Latched
Static Current: 2mA~5mA
Maximum Working Current: 30mA~55mA
Maximum Power for Motor: 10W
PCB Size: 20mm x 19mm x 10mm
The receiver can pair different model transmitters, includes model C-2 / C-3-2 (100M), CWB-2 / CWB-3 (50M, waterproof), CP-2 / CP-3 (500M), CB-2 / CB-3 (1000M), etc...

Usage (with the transmitter like C-2 or C-3-2): 
Connect red wire to “+” of power supply and black wire to “-“ of power supply. Then connect DC motor to wires “C” and “D”. (We have set the receiver as Latched control mode before delivery. If you want to use other control modes, do as following operation):

Set Latched control mode: connect terminals A and B.
Press button ▲ on the transmitter/controller: Wires C and D output DC 4~12V (C is “+” , D is “-”), motor rotates continuously in positive direction. 
Press ■ on remote or receiver: Wires C and D stop outputting and motor stops rotating. 

Press button ▼ on the transmitter/controller: Wires C and D output DC 4~12V (C is “-” , D is “+”), motor rotates continuously in positive direction. 
Press ■ on the transmitter/controller: Wires C and D stop outputting and motor stops rotating. 

Set Momentary control mode: Do not connect terminals A and B.
Press and hold button ▲ on the transmitter/controller: Wires C and D output DC 4~12V (C is “+” , D is “-”), motor rotates continuously in positive direction. 
Release button ▲ on the transmitter/controller: Wires C and D stop outputting and motor stops rotating. 

Press and hold button ▼ on the transmitter/controller: Wires C and D output DC 4~12V (C is “-” , D is “+”), motor rotates continuously in positive direction.
Release button ▼ on the transmitter/controller: Wires C and D stop outputting and motor stops rotating. 
Ask A Question
* Required information

*
*
bcym
*