Log In     My Account       Your cart is empty.     SKYPE

     English   English French German

Home >>  RF Receivers / Controllers >>  DC Power Receivers >>  1CH DC Receivers >>  1 Channel Door Remote Controller RF Receiver Latched Mode 9V/12V/24V

Stay In Touch

1 Channel Door Remote Controller RF Receiver Latched Mode 9V/12V/24V

Price: Starting at: US $14.00

Add to Cart:    Write Review

  • Model: 0020290 (S1SL-DC)

Please Choose:



  • Wireless control, easy to install
  • Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with voltage AC 110~240V or DC 0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz


  • Model No.: S1SL-DC06 /S1SL-DC09 / S1SL-DC12 / S1SL-DC24
  • Channel: 1 CH
  • Control Mode: Latched (Press -> On; Press again -> Off)
  • Coding Type: Fixed code
  • Coding Setting: By soldering
  • Power Supply (Operating Voltage): DC12V±1V (S1SL-DC12),DC6V±1V (S1SL-DC06),  DC9V±1V (S1SL-DC09), DC24V±1V (S1SL-DC24)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • PCB Size: 45mm x 28mm x 20mm
  • Maximum Working Current: 1A / each channel


  • Initial state: NO, COM = Normally Open; NC, COM = Normally Closed.
    1) Press button 1: Turn on relay (connect COM and NO, disconnect COM and NC)
    2) Press button 2: Turn off relay (disconnect COM and NO, connect COM and NC)
Ask A Question
* Required information