Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  Wall Light Switch >>  Touch Wall Light Switch >>  Black Crystal Panel US Tyle >>  1 Gang Perfect Black Crystal Glass Touch Wall Switch With LED Indicator US Style

Stay In Touch

1 Gang Perfect Black Crystal Glass Touch Wall Switch With LED Indicator US Style


Price: Starting at: US $30.00

Add to Cart:    Write Review

  • Model: 0031113

Please Choose:






Manual

Package Include:

  • 1 x Touch Wall Light Switch
  • 2 x Screws
  • 1 x User Manual

Product Specification:

  • Dimension: 115mm*78mm*42mm
  • Material: Crystal Glass Panel
  • Operating Voltage: AC110V~250V/50Hz/60Hz
  • Maximum Current for Each Gang: 5A
  • Maximum Power for Each Gang: 1000W/220V or 600W/120V
  • Self Consuming Power: Less than 0.1mW
  • Operating Environment: -30~70 Centigrade; Less than 95%RH
  • Lifelong: 100,000 Times of Operation
  • Installation is as same as normal light switch, so does not require Negative line; replace traditional wall switch completely and smoothly.
  • Using with all types of lights including Incandescent lamps, Halogen lamps, Fluorescent lamps, Energy saving lamps.
  • Note: The switch is not suitable for LED lamps or inductive ballast fluorescent, or any lamps with load power lower than 15W.

Switch Operation:

  • Touch the control icon on the switch surface, the LED indicator turns red, which means turning on the lamp; touch the icon again, the lamp turns off.
  • Operation video please visit http://www.youtube.com/watch?v=d4UWYmQsZV0

Warning:

  • Please shut down power before installation and dismantlement.
  • Doing the Installation and dismantlement must be professional.
  • Check the circle condition before installation.
  • Pay an attention to the lamp introduction, since some lamps have special condition.
  • Dismantle the product to avoid ruin as the circuit is testing.
  • Avoid shock, wateriness, hot, and knocking when installing and using the product.
  • Forbid wet cloth, chemistry and scour water when cleaning.
  • Over loading is forbidden.
  • Circuitry which the products installed in should be set properly.
  • Do not use metal box for installation, it maybe shorten the distance of remote control or cause electric shock.
Ask A Question
* Required information

*
*
nirr
*