Log In     My Account       Your cart is empty.     SKYPE


Home >>  Wall Light Switches >>  Dimmer Wall Light Switch >>  1 Gang Perfect White Crystal Glass Touch Dimmer Light Switch US Style

Stay In Touch

1 Gang Perfect White Crystal Glass Touch Dimmer Light Switch US Style

Price: Starting at: US $40.00

Add to Cart:    Write Review

  • Model: 0031117

Please Choose:


Package Include:

  • 1 x Dimmer Wall Light Switch
  • 2 x Screws
  • 1 x User Manual

Product Specification:

  • Dimension: 115mm*78mm*42mm
  • Material: Crystal Glass Panel
  • Operating Voltage: AC110V~250V/50Hz/60Hz
  • Maximum Current: 2.5A
  • Maximum Power: 500W/220V or 250W/120V
  • Self Consuming Power: Less than 0.1mW
  • Operating Environment: -30~70 Centigrade; Less than 95%RH
  • Lifelong: 100,000 Times of Operation
  • Installation is as same as normal light switch, so does not require Negative line; replace traditional wall switch completely and smoothly.
  • Using with Incandescent lamps, Halogen lamps, and other types of dimmable lamps.
  • Note: The switch is not suitable for LED lamps, energy saving lamps and fluorescent lamps.

Switch Operation:

  • Touch the control icon on the switch surface, the LED indicator turns red, which means turning on the lamp. Touch the icon again, the lamp turns off.
  • When the lamp is on: touch and hold the control icon to gradually increase the brightness of lamp; touch and hold the control icon again to gradually decrease the brightness of lamp.
  • Operation video please visit http://www.youtube.com/watch?v=uL34JciWlqo


  • Please shut down power before installation and dismantlement.
  • Doing the Installation and dismantlement must be professional.
  • Check the circle condition before installation.
  • Pay an attention to the lamp introduction, since some lamps have special condition.
  • Dismantle the product to avoid ruin as the circuit is testing.
  • Avoid shock, wateriness, hot, and knocking when installing and using the product.
  • Forbid wet cloth, chemistry and scour water when cleaning.
  • Over loading is forbidden.
  • Circuitry which the products installed in should be set properly.
  • Do not use metal box for installation, it maybe shorten the distance of remote control or cause electric shock.
Ask A Question
* Required information