Log In     My Account       Your cart is empty.     SKYPE

     English   English French German

Home >>  Wall Light Switches >>  Remote & Touch Switch >>  Gold Crystal LED Panel >>  1 Gang Remote & Touch Control Light Switch Set German Standard Gold

Stay In Touch

1 Gang Remote & Touch Control Light Switch Set German Standard Gold

Price: US $52.00

Add to Cart:    Write Review

  • Model: 0031202


Product Specification:

  • Dimension: 86mm*86mm*39mm
  • Material: Crystal Glass Panel
  • Operating Voltage: AC110V~250V/50Hz/60Hz
  • Maximum Current for Each Gang: 5A
  • Minimum Load Power for Each Gang: 15W
  • Maximum Load Power for Each Gang: 1000W/220V or 600W/120V
  • Self Consuming Power: Less than 0.1mW
  • Operating Environment: -30~70 Centigrade; Less than 95%RH
  • Lifelong: 100,000 Times of Operation
  • Installation is as same as normal light switch, so does not require Negative line; replace traditional wall switch completely and smoothly.
  • Using with all types of lights including Incandescent lamps, Halogen lamps, Fluorescent lamps, Energy saving lamps.
  • Note: The switch is not suitable for LED lamps or inductive ballast fluorescent, or any lamps with load power lower than 15W.

Switch Operation:

  • Touch the control icon on the switch surface, the LED indicator turns red, which means turning on the lamp; touch the icon again, the lamp turns off.

Remote Control Specification:

  • Size: 61mm x 33mm x 12mm
  • Buttons: 4 keys (A, B, C, D)
  • Control Lamps: 3 pcs
  • Remote Distance: 20m
  • Current: 15mA
  • Frequency: 433.92 MHz
  • Battery: 1 x 27A/12V battery (included, can be used for 12 months)
  • Press key A, key B, key C, the corresponding lamp will be ON; press key D, all lamps will be OFF.

Remote Control Operation:

  • Register the remote: Press the effective touch zone of switch for 5 seconds; you will hear the sound of “Du”. Then press key A, key B or key C. You will register successfully after you hear the sound of “Du”.
  • Cancel one registered remote: Press the effective touch zone of switch for 5 seconds; you will hear the sound of “Du”. Then press key A, key B or key C. If this operation is successful, you can hear two continuum sounds of “Du”.
  • Cancel all registered remotes: Press the touch zone of switch for 10 seconds. You can hear the first sound of “Du” when it is in 5 seconds; and you can hear the second sound of “Du” when it is in 10 seconds, which means this operation is successful.


  • Press key D, all lamps will be off.
  • Each switch are capable of registering 8 remote control buttons, the first one will be canceled when you register the ninth one.
  • Two switches cannot be registered at the same time.
  • Seconds’ interval is required for two times of remote control operation; otherwise the operation will be ignored.


  • 1. Shut off the power to the circuit and remove the switch cover with screwdriver.
  • 2. Connect the wires to the screw terminals.
  • 3. Fix tightly the switch to internal box with two screws. 
  • 4. Fix the cover.


  • 1. Please turn off power before installation and dismantlement, especially when fixing the switch cover.
  • 2. After turning on power, you have to wait about 30 seconds before operating the switch.
  • 3. Doing the Installation and dismantlement must be professional.
  • 4. Check the circle condition before installation.
  • 5. Pay an attention to the lamp introduction, since some lamps have special condition.
  • 6. Dismantle the product to avoid ruin as the circuit is testing.
  • 7. Avoid shock, wateriness, hot, and knocking when installing and using the product.
  • 8. Forbid wet cloth, chemistry and scour water when cleaning.
  • 9. Over loading is forbidden.
  • 10. Circuitry which the products installed in should be set properly.
  • 11. Do not use metal box for installation, it maybe shorten the distance of remote control or cause electric shock.
  • 12. Mount box should be standard "86" style and the dimensions at least 75mmx75mmx35mm.

Package Include:

  • 1 x Remote Touch Switch
  • 1 x Mini Remote Control
  • 2 x Screws
  • 1 x User Manual

Related Products

Ask A Question
* Required information