Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English   English French German


Home >>  DC Power Remote Kits >>  2CH DC 4 Control Modes Kits >>  10A 2 Button Universal Remote Control System DC Power Output

Stay In Touch

10A 2 Button Universal Remote Control System DC Power Output


Price: Starting at: US $36.00

Add to Cart:    Write Review

  • Model: 0020426 (S2X-DC & C-2)

Please Choose:




























Manual


 

Package Include:
1 x Receiver: S2X -DC06 / S2X -DC09 / S2X -DC12 / S2X -DC24
2 x Transmitter: C-2
1 x User manual
 

Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call,
etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves,
security alarm, business signs and various devices.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
DC Power Output: It can control DC equipment with voltage DC 6V / 9V / 12V / 24V.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.

With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver Parameters:
Model No.: S2X-DC06 / S2X-DC09 / S2X-DC12 / S2X-DC24
Power Supply (Operating Voltage): DC6V (S2X-DC06), DC12V±1V (S2X-DC12), DC9V±1V (S2X-DC09), DC24V±1V (S2X-DC24)
Output: DC6V (
S2X-DC06), DC12V (S2X-DC12), DC9V (S2X-DC09), DC24V (S2X-DC24)
Working Frequency: 315MHz / 433MHz
Channel: 2 CH
Control Modes: Toggle, Momentary, Latched, Momentary + Toggle
Static Current: ≤6mA
Maximum Working Current: 10A / each channel
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm
Work with Fixed code transmitters or Learning code transmitters.

Transmitter Parameters:
Model No.: 0021001 (C-2)
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Shell Color: Wood Color / White/ Black
Channel/Button: 2
Button Symbol:1, 2
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 315Mhz / 433Mhz
Encoding Chip: PT2262/ PT2264/ SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes.
Transmitting Distance: 100m / 300ft (theoretically)
The distance of 100m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions,
and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 100m.
If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 58mm x 39mm x 16mm
Weight: 30g
Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

Matching Transmitters:
The receiver can work with different transmitters, such as model C-2 / C-3 (100M), CWB-2 / CWB-3 (50M, waterproof), CP-2 (500M), or CB-2 / CB-3 (1000M) etc.
When you set the receiver in toggle or momentary mode, it should work with two buttons transmitter, such as model C-2 (100M), CWB-2 (50M, waterproof), CP-2 (500M), or CB-2 (1000M) etc.
When you set the receiver in latched mode, it should work with three buttons transmitter, such as model C-3 (100M), CWB-3 (50M, waterproof), or CB-3 (1000M) etc.

Working Range:
With a transmitter (such as C-2) to form a complete set, the maximum working distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other
constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as CB series transmitters.

Usage (with the transmitter C-2):
The receiver can be used to control DC 6V / 9V / 12V / 24V equipments. If the power supply of those equipments is DC 12V, you should choose the receiver with same DC 12V version; and if the
power supply of those equipments is DC 24V, you should choose the receiver with same DC 24V version.

Wiring:
If you want to control a DC 12V lamp, do as following:
1) Connect the positive pole of DC power supply to terminal “L/+”of INPUT, and connect the negative pole of DC power supply to terminal “N/-”of INPUT.
2) Connect the positive pole of lamp to terminal "L/+"of OUT, and connect the negative pole of lamp to terminal "N/-" of OUT.

Setting different control modes:
Setting different control modes: (We have set the receiver in toggle mode before delivery, if you want to use other modes, do as following operation.)
1) Setting control mode Toggle (with the transmitter C-2): Only connect Jumper-2.
Press button A: Turn on the relay 1,
terminal OUT 1 outputs DC power, the lamp 1 is turned on.
Press button A again: Turn off the relay 1, terminal OUT 1 no output, the lamp 1 is turned off.
Press button B: Turn on the relay 2, terminal OUT 2 outputs DC power, the lamp 2 is turned on.
Press button B again: Turn off the relay 2, terminal OUT 2 no output, the lamp 2 is turned off.

2) Setting control mode Momentary (with the transmitter C-2): Only connect Jumper-1.
Press and hold button A: Turn on the relay 1,
terminal OUT 1 outputs DC power, the lamp 1 is turned on.
Release button A: Turn off the relay 1, terminal OUT 1 no output, the lamp 1 is turned off.
Press and hold button B: Turn on the relay 2, terminal OUT 2 outputs DC power, the lamp 2 is turned on.
Release button B: Turn off the relay 2, terminal OUT 2 no output, the lamp 2 is turned off.

3) Setting control mode Latched (with the transmitter C-3): Do not connect Jumper-1 and Jumper-2.
Press button A: Turn on the relay 1,
terminal OUT 1 outputs DC power, the lamp 1 is turned on.
                      
   Turn off the relay 2, terminal OUT 2 no output, the lamp 2 is turned off.
Press button B: Turn on the relay 2, terminal OUT 2 outputs DC power, the lamp 2 is turned on.
                         
Turn off the relay 1, terminal OUT 1 no output, the lamp 1 is turned off.
Press button C: Turn off the relay 2, terminal OUT 2 no output, the lamp 2 is turned off.

4) Setting control mode Momentary + Toggle (with the transmitter C-2): Connect Jumper-1 and Jumper-2.
Control mode Momentary (Channel 1):
Press and hold button A: Turn on the relay 1, terminal OUT 1 outputs DC power, the lamp 1 is turned on.
Release button A: Turn off the relay 1, terminal OUT 1 no output, the lamp 1 is turned off.
Control mode Toggle (Channel 2):
Press button B: Turn on the relay 2, terminal OUT 2 outputs DC power, the lamp 2 is turned on.
Press button B again: Turn off the relay 2, terminal OUT 2 no output, the lamp 2 is turned off.

Wired control terminals:
The receiver has wired control terminals, you can connect external devices, sensors, limit switches or manual switches to trigger the receiver.

1) By low level signal:
You can connect external devices (with low level output signal) to trigger the receiver.
When external device outputs low level signal to terminals 1 (Signal +) and terminal 3 (Signal -), t
erminal of OUT1 output DC power, and the lamp 1 is turned on.
When the external device stops to output signal, Terminal of OUT1 stop outputting, the lamp 1 is turned off.
When the external device outputs low level signal to manual terminal 2 and terminal 3, Terminal of OUT2 output DC power, the lamp 2 is turned on
When the external device stops to output signal, Terminal of OUT2 stop outputting, the lamp 2 is turned off.

2) By NO/NC contact:
You can connect manual switches (with NO/NC contact) to trigger the receiver.
When connect terminals 1 and 3 by manual switch, Terminal of OUT1 output DC power, the lamp 1 is turned on.
When disconnect terminals 1 and 3 by manual switch, Terminal of OUT1 stop outputting, the lamp 1 is turned off.
When connect terminals 2 and 3 by manual switch, Terminal of OUT2 output DC power, the lamp 2 is turned on.
And when disconnect terminals 2 and 3 by manual switch, Terminal of OUT2 stop outputting, the lamp 2 is turned off. 

 

Ask A Question
* Required information

*
*
jtoh
*