This 15CH DC power universal rf remote control switch operates in toggle, momentary and latched control mode (set the mode as you like freely). It is great for hard to reach lights or other DC/AC electrical devices, remote distance can be 500m (theoretically). Widely used for gate remote control, motor remote control, garage door remote control, light remote control, etc. Operation video please visit http://www.youtube.com/watch?v=RUL2tbzRbeg
Control Lights, Motors, Fans, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC 110~240V or DC 0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Model No.: S15C-DC09 / S15C-DC12 / S15C-DC24
Channel: 15 CH
Control Modes: Toggle, Momentary, Latched
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): DC12V±1V (S15C-DC12), DC9V±1V (S15C-DC09), DC24V±1V (S15C-DC24)
Working Voltage Range of Relay: AC110~240V or DC0~28V
PCB size: 115mm x 73mm x 16mm
Static Current: 7~8mA
Maximum Working Current: 4A / each channel
Model No.: CP-15
Channel: 15 CH
Remote Control Distance: 500m / 1500ft (theoretically)
Encode: Fixed code by soldering
Unit size: 100mm x 45mm x 20mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
The button 1~15 of transmitter is corresponding to the relay 1~15 of receiver.
Setting method of control mode Toggle: Connect S1. Control mode Toggle (Channel 1~15): Press -> On; Press again -> Off.
Setting method of control mode Latched: Connect S2 Control mode Latched (Channel 1~15): Press -> On, other relays Off; Press other button -> Off.
Setting method of control mode Momentary: Disconnect S1 and S2. Control mode Momentary (Channel 1~15): Press and hold -> On; Release -> Off
1 x Receiver: S15C-DC09 / S15C-DC12 / S15C-DC24 ( 12 channels / 3 control modes)
1 x Transmitter: CP-15
1 x User manual
The theoretical distance is 500m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 500m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model: 0020909 ) on the receiver for improve the range - Click here.