Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  Mini RF Remote Control Kits >>  1CH DC12V Mini RF Wireless Remote Control - Transmitter & Receiver - Toggle Control Mode

Stay In Touch

1CH DC12V Mini RF Wireless Remote Control - Transmitter & Receiver - Toggle Control Mode


Price: Starting at: US $20.00

Add to Cart:    Write Review

  • Model: 0020206 (S1ST-DC12 & C-1)

Please Choose:



















Feature:

  • Wireless control, easy to install.
  • Control Lights, Motors, Fans, Electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC 0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:

  • Model No.: S1ST-DC12/S1ST-DC06/S1ST-DC09/S1ST-DC24
  • Channel: 1 CH
  • Control Mode: Toggle (Press -> On; Press again -> Off)
  • Coding Type: Fixed code
  • Coding Setting: By soldering
  • Power Supply (Operating Voltage): DC12V±1V (S1ST-DC12), DC6V±1V (S1ST-DC06), DC9V±1V (S1ST-DC09), DC24V±1V (S1ST-DC24)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • PCB Size: 45mm x 28mm x 20mm
  • Maximum Working Current: 1A / each channel

Transmitter:

  • Model No.: C-1
  • Channel: 1 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usages:

  • Initial state:NO, COM = Normally Open; NC, COM = Normally Closed.
  • Press the button: Turn on relay (connect COM and NO, disconnect COM and NC)
  • Press the button again: Turn off relay (disconnect COM and NO, connect COM and NC)

Note:

  • The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model:0020909 ) on the receiver for improve the range - Click here.
Ask A Question
* Required information

*
*
mpjq
*