Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  Motor/ Linear Actuator Remote Control Kits >>  DC Motor Remote Control Kits >>  1CH RF DC Electric Motor Controller Toggle Momentary Latched Mode

Stay In Touch

1CH RF DC Electric Motor Controller Toggle Momentary Latched Mode


Price: Starting at: US $36.00

Add to Cart:    Write Review

  • Model: 0020202 (S1FU-DC06/09/12/24 & C-3-2)

Please Choose:





















By using this motor remote control kit, you can remote control DC motor. Working modes include toggle, momentary and latching. Easy to wire and operate.The motor remote control kit is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and machines. Remote control distance is up to 1000M

Operation video: https://www.youtube.com/watch?v=mvWHDVpIi4g


 Manual



Package Include:
  • 1 x Receiver: S1FU-DC06 / S1FU-DC09 / S1FU-DC12 / S1FU-DC24 (Inversion Control Mode)
  • 2 x Transmitter: C-3-2
  • 1 x User manual

Feature:
  • Wireless control, easy to install
  • Control motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with DC voltage.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:
  • Model No: S1FU-DC06 / S1FU-DC09 / S1FU-DC12 / S1FU-DC24
  • Control Modes: Inversion (Toggle, Momentary, Latched)
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC6V (S1FU-DC06), DC9V±1V (S1FU-DC09), DC12V±1V (S1FU-DC12), DC24V±1V (S1FU-DC24)
  • Output: DC6V (S1FU-DC06), DC9V (S1FU-DC09), DC12V (S1FU-DC12), DC24V (S1FU-DC24)
  • PCB size: 67mm x 50mm x 18mm
  • Case size: 75mm x 54mm x 27mm
  • Static Current: ≤6mA
  • Maximum Working Current: 10A

Transmitter:
  • Model No.: C-3-2
  • Channel: 3 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by bonding pad encoded
  • Unit size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:
  • Connect the motor to Terminal B of relay 1 and relay 2.
  • Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation):
  • Setting control mode Toggle: Only connect Jumper-2.
  • Control mode Toggle: Press -> Rotate; Press again -> Stop.
  • Press button ▲: Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Press button ▲ again: Terminal B of relay 1 and relay 2 no output, motor stops
  • Press button ▼: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Press button ▼ again: Terminal B of relay 1 and relay 2 no output, motor stops

  • Setting control mode Momentary: Only connect Jumper-1.
  • Control mode Momentary: Press and hold -> Rotate; Release -> Stop.
  • Press and hold button ▲: Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Release button ▲: Terminal B of relay 1 and relay 2 no output, motor stops
  • Press and hold button ▼: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Release button ▼: Terminal B of relay 1 and relay 2 no output, motor stops

  • Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
  • Control mode Latched: Press button ▲ and ▼ -> Rotate; Press button ■ -> Stop.
  • Press button ▲: Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Press button ▼: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Press button ■: Terminal B of relay 1 and relay 2 no output, motor stops

  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.

Ask A Question
* Required information

*
*
ngws
*