Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  Wall Light Switch >>  Touch Wall Light Switch >>  Floral Red Crystal Panel >>  3 Gang Crystal Glass Panel Red Floral Touch Light Switch

Stay In Touch

3 Gang Crystal Glass Panel Red Floral Touch Light Switch


Price: Starting at: US $32.00

Add to Cart:    Write Review

  • Model: 0031067

Please Choose:






Manual
 

Only Live wire is connected to this switch, without Neutral wire!

Package Include:

  • 1 x Touch Wall Switch
  • 2 x Screws
  • 1 x User Maunal

Products specification:

  • Dimension: 86mm*86mm*37mm.
  • Material:Red Crystal Glass Panel.
  • Operating Voltage: AC110V~250V/50Hz/60Hz.
  • Maximum Current for Each Gang: 5A.
  • Maximum Power for Each Gang: 1000W/220V or 600W/120V.
  • Self Consuming Power: Less than 0.1mW
  • Operating Environment: -30~70 Centigrade; Less than 95%RH.
  • Lifelong: 100,000 Times of Operation.
  • Installation is as same as normal light switch, so does not require Negative line; Replace traditional wall switch completely and smoothly.
  • Using with all types of lights including Incandescent lamps, Halogen lamps, Fluorescent lamps, Energy saving lamps.
  • Note: The switch is not suitable for LED lamps or inductive ballast fluorescent, or any lamps with load power lower than 15W.

Switch Operation:

  • Touch the control icon on the switch surface, turn on the lamp; Touch the icon again, turn off the lamp.

Warning:

  • Please shut down power before installation and dismantlement.
  • Doing the Installation and dismantlement must be professional.
  • Check the circle condition before installation.
  • Pay an attention to the lamp introduction, since some lamps have special condition.
  • Dismantle the product to avoid ruin as the circuit is testing.
  • Avoid shock, wateriness, hot, and knocking when installing and using the product.
  • Forbid wet cloth, chemistry and scour water when cleaning.
  • Over loading is forbidden.
  • Circuitry which the products installed in should be set properly.
  • Do not use metal box for installation, it maybe shorten the distance of remote control or cause electric shock.
  • Mount box should be standard "86" style and the dimensions at least 75mmx75mmx35mm. We also can offer this mount box.
Ask A Question
* Required information

*
*
htxj
*