3 Gang White Crystal Glass Panel Floral Touch Control Light Switch

			Manuel

Only Live wire is connected to this switch, without Neutral wire!

Package Include:

• 1 x Touch Wall Switch
• 2 x Screws
• 1 x User Maunal

Products specification:

• Dimension: 86mm*86mm*37mm.
• Material: White Crystal Glass Panel.
• Operating Voltage: AC110V~250V/50Hz/60Hz.
• Maximum Current for Each Gang: 5A.
• Maximum Power for Each Gang: 1000W/220V or 600W/120V.
• Self Consuming Power: Less than 0.1mW
• Operating Environment: -30~70 Centigrade; Less than 95%RH.
• Lifelong: 100,000 Times of Operation.
• Installation is as same as normal light switch, so does not require Negative line; Replace traditional wall switch completely and smoothly.
• Using with all types of lights including Incandescent lamps, Halogen lamps, Fluorescent lamps, Energy saving lamps.
• Note: The switch is not suitable for LED lamps or inductive ballast fluorescent, or any lamps with load power lower than 15W.

Switch Operation:

• Touch the control icon on the switch surface, turn on the lamp; Touch the icon again, turn off the lamp.

Warning:

• Please shut down power before installation and dismantlement.
• Doing the Installation and dismantlement must be professional.
• Check the circle condition before installation.
• Pay an attention to the lamp introduction, since some lamps have special condition.
• Dismantle the product to avoid ruin as the circuit is testing.
• Avoid shock, wateriness, hot, and knocking when installing and using the product.
• Forbid wet cloth, chemistry and scour water when cleaning.
• Over loading is forbidden.
• Circuitry which the products installed in should be set properly.
• Do not use metal box for installation, it maybe shorten the distance of remote control or cause electric shock.
• Mount box should be standard "86" style and the dimensions at least 75mmx75mmx35mm. We also can offer this mount box.