Log In     My Account       Your cart is empty.     SKYPE

     English   English French German

Home >>  Wireless Vibrator & Kits >>  315MHz 500M Wireless Vibrative -1 Transmitter & 4 Receivers

Stay In Touch

315MHz 500M Wireless Vibrative -1 Transmitter & 4 Receivers

Price: Starting at: US $90.00

Add to Cart:    Write Review

  • Model: 0020176 (4Z-04+1CP-4)

Please Choose:

The Wireless Remote Control Vibrator is designed for one-transmitter-many- Wireless Remote Control Vibrators system. You can use a one button transmitter to control 1 Wireless Remote Control Vibrator, or use a 4 buttons transmitter to control 6 Wireless Remote Control Vibrators, or use a 12 buttons transmitter to control 12 Wireless Remote Control Vibrators.


Wireless control.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
Adopt single chip technology to build millions of code.
One/several transmitters can control one/several receivers simultaneously.
Two or more transmitter & receivers set can be used in the same place.
Transmitting Frequency: 315MHz

Model No.: 0021012 (CP-4)
Shell Color: White
Channel/Button: 4
Button Symbol: A, B, C, D
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 8mA
Operating Frequency: 315Mhz
Encoding Chip: PT2262/ PT2264/ SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 500m / 1500ft (theoretically)
The distance of 500m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 500m.
If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 85mm x 36mm x 16mm
Weight: 40g
Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.
How to set up the 8-bits code of the transmitter:
1. Open the transmitter shell, then you will see the circuit board. There are two rows pads and one row of chip feet on the back side.
2. The left row of pads is “L” side, and the right row of pads is “H” side.
3. If solder the middle row of chip feet to the “L” side, it is code 1. If solder the middle row of chip feet to the “H” side, it is code 2. Don’t solder to any side, it is code 0.
4. The 8-bits code order is from top to bottom (from D1 to D8).
5. Here is an example, the 8-bits code in the picture is 10021000, solder as the following way:
6. Code 0: don’t solder any side, like D2, D3, D6, D7, D8
7. Code 1: solder to the “L” side, like D1 and D5.
8. Code 2: solder to the “H” side, like D4.
Vibration Receiver:
Model No.: Z-04
Mode: Vibration
Decode: by learning
Power Supply: 1 x AAA 1.5V Battery (Not included)
Size: 49mm x 27mm x 13mm
1) Press and hold button: The receiver vibrates.
2) Release the button: The receiver stops vibration.
How to pair the transmitter to the receiver:
1) Press the learning button of receiver for 1- 2 seconds; The LED on the receiver flashes one time. The receiver enters into status of LEARNING.
2) Press any one button on transmitter within 15 seconds. If the LED is on (or the receiver vibrates), it means learning is successful.
4) The receiver can learn several remote controls with different codes.
Delete all transmitters:
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
Operation: Press and hold the learning button of receiver until signal LED from on to off (or the receiver from vibrate to stop vibration); release the learning button. That means all stored codes have been deleted successfully.

Ask A Question
* Required information