Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English French German


X
Hi, I'm Tom. Welcome to our shop, Carymart offers you the premium rf remote control equipment. We suggest you reading our FAQs before making your decision. If you have any other question, please contact us. We will reply you as soon as possible.

SKYPE
Contact Us


Home >>  AC Output Remote Switches >>  4CH AC 120V 220V Output >>  Far Distance 4CH High Power 110V 220V AC Output Wireless Control Switch

Far Distance 4CH High Power 110V 220V AC Output Wireless Control Switch


Price: US $120.00

  • Model: 0020479 (S4PX-AC-ANT3 & CB-4)

Please Choose:






Qty:    



Receiver Feature:
  • Wireless control, easy to install
  • Waterproof case with waterproof connectors.
  • High power, each output can work at maximum 30A current.
  • AC power output, can be used in home automation, such as security system, remote control lights, motors, doors / locks / windows / blinds / cars, and various equipment. 
  • The receiver has four input control terminals, you can connect external devices, sensors, or manual switches to these terminals to control the outputs of receiver.
  • With the external telescopic antenna, it can have a further working range.
  • With a transmitter (such as CB-4) to form a complete set, the distance can reach 2000m.
  • It also can be used in agriculture and industry automation, such as long range and high power remote control devices.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more units in the same place, you can set them with different codes.

Receiver parameters:
  • Model No.: S4PX-AC-ANT3
  • Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
  • Output: AC100~240V (110V/120V/220V/240V)
  • Working Frequency: 433MHz
  • Channel: 4 CH
  • Control Modes: Self-locking, Momentary, Interlocking, Momentary + Self-locking
  • Maximum Working Current: 30A / each channel
  • Static Current: ≤6mA
  • PCB size: 170mm x 109mm x 18mm
  • Case size:200mm x 120mm x 53mm

External telescopic antenna:
  • Length of external telescopic antenna: 108mm / 445mm (stretch)
  • External telescopic antenna use SMA connector.
  • If you stretches the external telescopic antenna, it can have a further working range, which is twice as much as it used to be.

Transmitters Description: 
  • Model No.: 0021026 (CB-4)
  • Button Symbol: A, B, C, D
  • Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
  • Operating Current: 30mA
  • Operating Frequency: 433Mhz
  • Encoding Chip: PT2262 / PT2264 / SC2262
  • Encoding Type: Fixed code by soldering, up to 6561 codes
  • Transmitting Distance: 1000m / 3000ft (theoretically) 
  • Modulation Mode: ASK
  • Operating Temperature: -20 ° C to +70 ° C 
  • Unit Size: 135mm x 42mm x 25mm

The working range:
  • With a transmitter (such as CB-4) to form a complete set, the distance can reach 2000m. The distance of 2000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 2000m.
  • If you want to have a further working range, you can install a magnetic sucker antenna (model 0020910).
 
Usage (with the transmitter like CB-4):
  • You can use this 4 channel receiver to control 4 AC equipments
  • If you want to control four AC 220V lamps, do as following:
  • Connect AC 220V power to terminals “L” and “N“, and connect lamp 1 to terminals “L” and “N” of OUT1, connect lamp 2 to terminals “L” and “N” of OUT2, connect lamp 3 to terminals “L” and “N” of OUT3, connect lamp 4 to terminals “L” and “N” of OUT4 .

Four working modes:
  • Self-locking Mode: Press -> On, press again -> Off.
  • Momentary Mode: Press and hold -> On; Release -> Off.
  • Interlocking Mode: Press one button-> On; Press another button -> Off. 
  • Momentary + Self-locking: Control mode Momentary (Channel A, B): Press and hold -> On; Release -> Off. Control mode Self-locking (Channel C, D): Press -> On; Press again -> Off.

Download the User Manual: Wireless Receiver,  Remote Controller

Ask A Question
* Required information

*
*
dgpt
*