Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  Special Remote Kits >>  Current Trigger Remote Kits >>  AC 120V 240V Power Input Wireless Trigger Remote Control Device

Stay In Touch

AC 120V 240V Power Input Wireless Trigger Remote Control Device


Price: US $89.00

Add to Cart:    Write Review

  • Model: 0020517 (S1X-AC-ANT3 & CB-2V-AC)

Please Choose:




















Manuel


Package Include:
1 x Receiver: S1X-AC-ANT3
1 x Transmitter: CB-2V-AC
1 x User manual

Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK, France...
AC Power Output: It can control AC equipment with voltage 110V / 120V / 220V / 240V AC.
With w
ired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
With the external antenna, it can have a further working range.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver Parameters:
Model No.: S1X-AC-ANT3
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Working Frequency: 315MHz
Channel: 1 CH
Control Modes: Latched
Static Current: ≤6mA
Maximum Working Current: 10A
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm
Work with Fixed code transmitters or Learning code transmitters.

External Telescopic Antenna (ANT3) for the receiver:
Length of external telescopic antenna: 108mm / 445mm (stretch)
With SMA connector.
If you stretches the external telescopic antenna, it can have a further working range.

Transmitter Parameters:
Model No.: CB-2V-AC
With AC Power Trigger Input Wires
Trigger Input: AC 100~240V
Channel/Button: 2
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for a week, if you want a longer working time, please use a 9V power adapter.)
Operating Current: 30mA
Operating Frequency: 315 MHz
Transmitting Distance: 1000m / 3000ft (theoretically)
It has an on / off button on the side.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 100mm x 68mm x 50mm
With SMA external telescopic antenna

Working Range:
Super long range, with this transmitter CB-2V-AC to form a complete set, the maximum working distance can reach 2000M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other
constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.

Usage:
The receiver can be used to control AC 110~240V equipments.

Wiring:
If you want to control an AC 220V lamp, do as following:
1) Connect the live wire of AC power supply to terminal “L / +” of INPUT, and connect the neutral wire of AC power supply to terminal “N / -” of INPUT.
2) Connect one side of AC lamp to terminal "L / +" of OUTPUT, and connect another side of AC lamp to terminal "N / -" of OUTPUT.

Operation:
1) Controlling the device by pressing buttons on the transmitter (CB-2V-AC):
Press button A of the transmitter: Terminals “OUT1”of the receiver outputs AC power, the lamp is on.
Press button B of the transmitter: Terminals “OUT1” of the receiver stops outputting, the lamp is off.

 2) Controlling the device by inputting AC 100~240V power to the input wire of the transmitter:
When connect AC100~240V power to the input wire (the red wire and black wire) of the transmitter, the transmitter sends an RF signal "ON" to trigger the receiver, the output terminals "OUT1"
outputs AC power, and the lamp is turned on.
When disconnect AC 100~240V power to the input wire, the transmitter sends another RF signal "OFF" to trigger the receiver, the output terminals "OUT1" stops outputting, and the lamp is
turned off.

Wired control terminals:
The receiver has manual control terminals, you can connect external devices, sensors, or manual switches to control the receiver.
1) Signal input:
You can connect external devices (with low level output signal) to manual terminals 1 (Signal +) and terminal 3 (Signal -), then the external device’s output signal can control the receiver.
When the external device outputs low level signal to manual terminal 1 and terminal 3, t
urns on the relay. Terminals “OUT1” outputs AC power, the lamp is turned on.
When t
he external device stops to output signal, turns off the relay. Terminals “OUT1” stops outputting, the lamp is turned off.

 2) The manual switches:
You can connect manual switches to manual terminals 1 and 3, then you can use manual switches to control the receiver.
When connect terminals 1 and 3, the receiver turns on the relay. Terminals “OUT1” outputs AC power, the lamp is turned on.
And when disconnect terminals 1 and 3, the receiver turns off the relay. Terminals “OUT1” stops outputting, the lamp is turned off.

How to pair the transmitter to the receiver:
1) Press the learning button of receiver for 1- 2 seconds; signal LED on the receiver is on. The receiver enters into status of LEARNING.
2) Press any one button on transmitter. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the learning button, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.

Delete all transmitters:
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
Operation: Press and hold the learning button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.

Ask A Question
* Required information

*
*
iata
*