Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
Feature: Application:
It can be used in industry automation, agriculture automation and home
automation, such as factory, house, farm, pasture, vehicle, ship, offshore
operation, aerial vehicle, field call, etc. It can remote control equipments on
land, water and air, such as remote control lights, sirens, locks, motors,
fans, winches, blinds, linear actuators, doors, windows, electric solenoid
valves, security alarm, business signs and various devices. Wireless control, easy
to install. Universal input: Support voltage of AC110V (100V~120V), widely used in US,
Canada... and voltage of AC220V (200V~240V), used in UK, France... AC Power
Output: It can control AC equipment with voltage 110V / 120V / 220V / 240V AC. High
Power: It can work at maximum current 13A, such as 2800W/220V. With wired control terminals:
You can connect sensors, limit switches,
manual switches or external devices to control wireless socket. You can
turn on/ off wireless socket with transmitter (remote control) from any place
within a reliable distance. Wireless RF
signal can pass through walls, floors, doors or windows. With
reverse power protection and over current protection. Reliable
control: Wireless socket only works with the transmitter which use same code. One/several
transmitters can control one/several wireless socket simultaneously. You can use
two or more units in the same place. Wireless Socket
Parameters: Model No.: S1PX-UK-AC220 With British Standards Plug and Socket. Power Supply
(Operating Voltage): AC100~240V (110V/120V/220V/240V) Output: AC100~240V (110V/120V/220V/240V) Working Frequency: 433MHz Channel: 1CH Control Modes: Self-locking, Momentary, Interlocking Static Current: ≤6mA Maximum Working Current:
13A PCB size: 90mm x 59mm
x 18mm Case size: 100mm x 68mm
x 50mm Work with Fixed code transmitters or Learning code transmitters. Matching Transmitters: This wireless socket can
work with different transmitters, such as model C-1 / C-2 (100M), CWB-1 / CWB-2
(50M, waterproof), CP-1 / CP-2/CV-2 (500M), or CB-1 / CB-2 (1000M), CBW-1/CBW-2
(1000M, waterproof) etc. When you set wireless
socket in toggle or momentary mode, it should work with single button transmitter,
such as model C-1 (100M), CWB-1 (50M, waterproof), CP-1 (500M), or CB-1 (1000M),
CBW-1 (1000M, waterproof) etc. When you set wireless socket in latched mode, it
should work with two buttons transmitter, such as model C-2 (100M), CWB-2 (50M,
waterproof), CP-2 (500M), CV-2 (500M), CB-2 (1000M), or CBW-2 (1000M,
waterproof) etc. Working
Range: With a transmitter (such as CWB-2) to form a complete
set, the maximum working distance can reach 50M in an open ground. The maximum working
distance is a theoretical data, it shall be operated in an open ground, no
barriers, no any interference. But in the practice, it will be hindered by
trees, walls or other constructions, and will be interfered by other wireless
signals. Therefore, the actual distance may not reach this
maximum working distance. If you want
to have a further working range, you can install an external antenna to wireless
socket, and you also can use a powerful
transmitter, such as CB series transmitters. Usage: Wireless socket can be used to control AC 110~240V equipments. Wiring: If you want to control a AC 220V exhaust fan, do as following: Connect the exhaust fan the socket, and connect the plug to the AC 220V power supply. Setting different control modes: Setting
different control modes (We have set wireless socket as Interlocking control mode
before delivery. If you want to use other control modes, do as following
operation): Setting
control mode Interlocking: Do not connect Jumper-1 and Jumper-2. Control
mode Interlocking (such as with transmitter CWB-2): Press button A -> On, Press button
B -> Off. Press button
A of the transmitter: The socket outputs AC power, the exhaust fan works. Press button
B of the transmitter: The socket stops outputting, the exhaust fan stops. Setting
control mode Self-locking: Only connect Jumper-2. Control
mode Self-locking (such as with transmitter CWB-1): Press -> On; Press again ->
Off. Press button
of the transmitter: The socket outputs AC power, the exhaust fan works. Press button
again: The socket stops outputting, the exhaust fan stops. Setting
control mode Momentary: Only connect Jumper-1. Control
mode Momentary (such as with
transmitter CWB-1): Press and hold -> On; Release -> Off. Press and
hold button of the transmitter: The socket outputs AC power, the exhaust fan works. Release
button of the transmitter: The socket stops outputting, the exhaust fan stops. Wired control terminals: Wireless
socket has manual control terminals, you can connect external devices, sensors,
or manual switches to control wireless socket. 1) Signal
input: You
can connect external devices (with low level output signal) to manual terminals
1 (Signal -) and terminal 2 (Signal +), then the external device’s output
signal can control wireless socket. When
the external device outputs low level signal to manual terminal 1 and terminal
2, turn
on the relay. The socket outputs AC power. When the external device stops to output signal, turn off the relay. The socket stops outputting. 2) The
manual switches: You
can connect manual switch to terminals 1 and 2, and then you can use this
manual switch to control wireless socket. When
connect terminals 1 and 2, turn on the relay. The
socket outputs AC power. And when
disconnect terminals 1 and 2,turn off the
relay. The socket stops outputting.