Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  2000 Meters Remote Kits >>  2 Channel AC Power Supply >>  2000M Long Range 2 Channel AC Power Relay Output Tri-mode On Off Remote Control Switch

Stay In Touch

2000M Long Range 2 Channel AC Power Relay Output Tri-mode On Off Remote Control Switch


Price: US $66.00

Add to Cart:    Write Review

  • Model: 0020471 (S2U-AC220-ANT2 & CB-2)

Please Choose:



























Feature:
  • Wireless control, easy to install
  • Waterproof case with waterproof connector 
  • Relay output, can control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with voltage AC 110~240V or DC 0~28V.
  • Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK, France...
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of over current protection, short-circuit protection and temperature protection.
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.

Receiver Parameters:
  • Model No.: S2U-AC220-ANT2
  • Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
  • Working Frequency: 315MHz / 433MHz
  • Channel: 2 CH
  • Control Modes: Toggle, Momentary, Latched, Momentary + Toggle
  • Output: Relay output (Normally open and normally closed)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • Maximum Working Current of Relay: 10A
  • Static Current: ≤6mA
  • PCB size: 90mm x 59mm x 18mm
  • Case size: 100mm x 68mm x 50mm
  • Work with Fixed code transmitters or Learning code transmitters.
  • The receiver can pair different model transmitters, includes model C-2 / C-3 (100M), CWB-2 / CWB-3 (50M, waterproof), CP-2 / CP-4 (500M) and CB-2 / CB-3 (1000M) etc...

External Extend Antenna:
  • Frequency Range: 300~450MHz
  • Impedance: 50Ω
  • Antenna Length: 15cm
  • Cable Length: 150cm
  • Weight: 35g
  • Anti-interference, waterproof, shielded wire set inside
  • Magnetic stand design for easy to install

Usage (with the transmitter):
  • The receiver can be used to control both DC 0~28V and AC 110~240V equipments.
  • Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals B and C are Normally Open; Terminals A and B are Normally Closed.

transmitter: 
  • Model No.: 0021024 (CB-2)
  • Shell Color: Grey
  • Channel/Button: 2
  • Button Symbol: big button, small button
  • Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
  • Operating Current: 30mA
  • Operating Frequency: 315Mhz / 433Mhz
  • Encoding Chip: PT2262 / PT2264 / SC2262
  • Encoding Type: Fixed code by soldering, up to 6561 codes
  • Transmitting Distance: 1000m / 3000ft (theoretically) 
  • The distance of 1000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 1000m.
  • If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
  • Modulation Mode: ASK
  • Operating Temperature: -20 ° C to +70 ° C 
  • Unit Size: 135mm x 42mm x 25mm
  • Weight: 95g
  • Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

Package Include:

  • 1 x Receiver: S2U-AC220-ANT2 (2 Channel / 4 Control Modes)
  • 1 x Transmitter: CB-2
  • 1 x User manual

Note:

  • The distance of 2000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it may be hindered by trees, walls or other constructions, and may be exposed to some interference by other signals. Therefore, the actual distance can not reach 2000m. It depends on the actual working environment.
 Download the User Manual: Wireless Receiver,  Remote Controller
Ask A Question
* Required information

*
*
jrgt
*