Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
Package Include:
1 x Receiver: S1X-AC-ANT3
2 x Transmitter: C-2
1 x Electric solenoid valve
1 x User manual
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated
Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC 100~240V.
You can turn on/off the receiver with transmitter (remote control) from any
place within a reliable distance; the wireless RF signal can pass through
walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and
developed with low-power and high-speed CMOS technology.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with
different codes.
Transmitting Frequency: 433MHz
Receiver:
Model No.: S1X-AC
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): AC100~240V
PCB size: 88 x 80 x 18 mm (3.5 x 3.1 x 0.7 inches)
Case size: 115 x 90 x 55 mm (4.5 x 3.6 x 2.2 inches)
Maximum Working Current: 10A
Transmitter:
Model No.: C-2
Shell color: white
Channel: 2 CH
Remote Control Distance: 100m / 300ft (theoretically)
Encode: Fixed code by Soldering
Unit size: 58mm x 39mm x 16mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Electric Solenoid Valve Parameters:
Wattage: 24W
Working Voltage: AC 220V or 110V
Type: normally closed (power on, solenoid valve open; power off, solenoid
valve close)
Working Temperature: -5℃~100℃
Operating Pressure: 0~1.0Mpa (0~10kg/cm²)
Material of valve body and coil: 100% Brass
Usage: water, air, diesel, gas, low viscosity fluids
Pipe size
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1.2"
1.5"
2"
Thread type
G1/8"
G1/4"
G3/8"
G1/2"
G3/4"
G1"
G1.2"
G1.5"
G2"
Internal Orifice
9MM
12MM
15MM
20MM
25MM"
32MM"
40MM"
45MM"
58MM"
Usage:
Setting different control modes (We have set the receiver as Self-locking
mode before delivery. If you want to use other modes, do as following):
1) Setting control mode Self-locking: Only connect Jumper-2.
Press button 1: Terminal OUT outputs AC power, Electric solenoid valve is
turned on.
Press button 1 again: Terminal OUT stop to output, Electric solenoid valve
is turned off.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay, terminal OUT outputs AC power.
Electric solenoid valve work.
Release button 1: Turn off the relay, terminal OUT no output. Electric
solenoid valve stops work .
3) Setting control mode Interlocking: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay, terminal OUT outputs AC power. Electric
solenoid valve work.
Press button 2: Turn off the relay, terminal OUT no output. Electric
solenoid valve stops work.
