2 Channel Motor Remote Controller Operate Electric Trailer and Winch

Question:

Our company manufactures a series of trailers that use 12vdc hydraulics to tilt and lower the decks. We also often install electric winches on trailers and are looking for a momentary remote to operate the trailer and the 12vdc electric winch.

Answer:

We think 2 channel dc motor remote controller model of 0020481 (S2PF-DC12 & CV-6) is suitable for you. It is used to control 2 12vdc motors rotating forward and reversal. Maximum working current is up to 30 Amp. This motor remote controller is applicable to control motors of heavy duty electrical devices and equipment, such as your electric trailer and winch.

Wiring diagram is as follow. Connect wires of 12vdc power supply to terminals “+” and “-“; connect wires of trailer motor to terminals “A1” and “A2”; connect wires of winch motor to terminals “B1” and “B2”.

Setting momentary control mode: connect Jumper-1.

Press and hold button 1: trailer motor rotates in positive direction.
Release button 1: trailer motor stops.
Press and hold button 3: trailer motor rotates in reversal direction.
Release button 3: trailer motor stops.

Press and hold button 2: winch motor rotates in positive direction.
Release button 2: winch motor stops.
Press and hold button 4: winch motor rotates in reversal direction.
Release button 4: winch motor stops.

Online shop: www.carymart.com

Leave a Reply

Bad Behavior has blocked 456 access attempts in the last 7 days.