Remote Control 4 External Blinds Open and Close

Question:

I am wondering if you have a solution for multiple blind switches (4 external blinds) which operate on 240V. I would like to have a centralized remote system to control them open or close without going from one room to another. Can you suggest something as a solution? Thanks.

Answer:

You can order 4 receivers for motor control model of S1FC-AC220 (remember to choose operating voltage as 240V before you confirm the order); 4 external magnetic antennas 0020909, which are respectively installed to each receiver for longer remote distance; and one long range remote transmitter CB-4.

As you see in the picture of remote, button A can be set to control motor of blinds forward direction; button C can be set to control reversal direction. Buttons B and D can be set to stop the rotation.

Wiring diagram is as follow:

Connect live wire to terminal “L” and neutral wire to terminal “N”. Then connect three wires of blind motor to terminals “UP”, “COMMON” and “DOWN”.

Press button A, 4 motors of blinds rotate continuously in forward direction at the same time.
Press button B, rotation stops.
Press button C, 4 motors of blinds rotate continuously in reversal direction at the same time.
Press button D, rotation stops.

Online shop: www.carymart.com

Leave a Reply

Bad Behavior has blocked 83 access attempts in the last 7 days.