Remote Control Switch Linear Actuator Motor

One of our customers needs motor remote controller to switch his two linear actuator motors of car trunk and a lamp in it. See the following picture, there are two linear actuator motors to push open the trunk. They are controlled by a manual switch. Now we will help the customer to change the manual switch with our rf motor remote controller. So that he can press the remote button from any place within reliable distance to automatically open the trunk.

Firstly, let’s see the things we  need to prepare:
1 x RF motor remote controller kit (S1F-DC12 & C-3)
2 x linear motors
1 x DC 12V power adapter
1 x lamp
Some wires

Secondly, connect the wires to the receiver. There are 6 terminals on the receiver. Connect DC 12V power supply to terminals 1 and 2; connect two linear motors to terminals 5 and 6, and connect the lamp to terminals 3 and 4.

Finally, use rf remote to control the linear actuator motor.
Press and hold button ▲ on remote: motor rotates in forward direction
Release button ▲: motor stops
Press and hold button ▼ on remote: motor rotates in reversal direction
Release button ▼: motor stops
Press button ■: turn on the light
Press button ■ again: turn off the light.

Our shop online: http://www.carymart.com

Leave a Reply

Bad Behavior has blocked 41 access attempts in the last 7 days.