All posts in category Relay control transmitter

1 Channel Long Range Transmitter of Remote Control by one Relay

Question from customer:  I need a wireless relay setup like the 1 channel long range unit that you have listed. I prefer a circuit board type transmitter instead of a hand held unit with a NO input for the transmit signal. Is this available?  Answer:   We introduce the remote control device to you according to […]

Wireless Remote Control Transmitter by Connecting Wires to the equipment with 6 relays

Question from customer:     I can use 4 each of the 6 relay/channel receivers. I cannot use a handheld remote with buttons. I need 4 transmitters that I can control each transmitter with 6 switch / contact     closures. There will be no one there to push a button. Basically there will be 6 relays external to the transmitter that will serve as the input to the transmitter. When any one of the relays operate the transmitter will cause the corresponding relay to close in the receiver. I have  to be able to match each transmitter with one of the receivers so there will be no interference between them.  Answer:    According to your requirement, we advise you to use the facility: it is model S6C-DC12-ANT2 & CB-6. The receiver has 6 relays (S6-DC12-ANT2) and the transmitter has 6 switches (CB-6). You can connect 12 wires of transmitter to the 6 relays in your equipment. […]

Bad Behavior has blocked 762 access attempts in the last 7 days.