Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  RF Receiver / Controller >>  DC Receiver >>  1 Channel DC Receiver >>  DC Power 1 Channel Mini RF Remote Control Receiver Toggle Mode

Stay In Touch

DC Power 1 Channel Mini RF Remote Control Receiver Toggle Mode


Price: Starting at: US $13.00

Add to Cart:    Write Review

  • Model: 0020057 (S1ST-DC12)

Please Choose:




















Manual


Feature:

  • Wireless control, easy to install
  • Relay output, can control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110-240V or DC 0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Use an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more units in the same place, you can set them with different codes.
Receiver Parameters:
  • Model No.: S1ST-DC06 /S1ST-DC09 / S1ST-DC12 /S1ST-DC24
  • Power Supply (Operating Voltage): DC12V±1V (S1ST-DC12), DC6V±1V (S1ST-DC06),DC9V±1V (S1ST-DC09),DC24V±1V (S1ST-DC24)
  • Working Frequency: 315MHz / 433MHz
  • Channel: 1 CH
  • Control Modes: Toggle (Press -> On; Press again -> Off)
  • Output: Relay output (Normally open and normally closed)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • Maximum Working Current of Relay: 1A / each channel
  • Static Current: ≤6mA
  • PCB size: 45mm x 28mm x 20mm
  • Work with Fixed code transmitters 
  • The receiver can pair different model transmitters, includes model C-1 (100M), CWB-1 (50M, waterproof), CP-1 (500M) and CB-1 (1000M) etc...
  • If you want to have a further working range, you can install an external antenna to the receiver, such as magnetic mount antenna (model 0020909), which working range is three times as much as it used to be. Or telescopic antenna (model 0020908), which working range is twice as much as it used to be.
Usage (with the transmitter):
  • Connect DC power to terminal “+” and “-“.
  • Initial state of relay output terminals: Terminals NO and COM are Normally Open; Terminals NC and COM are Normally Closed.
1) Press the button on the transmitter: Turn on relay (connect terminals COM and NO, disconnect terminals COM and NC)
2) Press the button again: Turn off relay (disconnect terminals COM and NO, connect terminals COM and NC)


Ask A Question
* Required information

*
*
nmed
*