Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P447, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Use ULN2003 to drive relay, with strong anti-interference.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in same place, you can set them with different codes.
Power Supply (Operating Voltage): DC12V±1V (S8CA-DC12), DC9V±1V (S8CA-DC09), DC24V±1V (S8CA-DC24)
Working Voltage Range of Relay: AC110~240V or DC0~28V
PCB Size: 94mm x 73mm x 18mm
Case Size: 100mm x 80mm x 30mm
Static Current: ≤6mA
Maximum Working Current: 5A / each channel
Usage:
1) Learning Toggle control mode: When the receiver is in the status of LEARNING, press button 1 of the remote control. Control mode Toggle (Channel 1~8): Press -> On; Press again -> Off. Press button 1: Turn on relay 1 (connect B and C, disconnect A and B) Press button 1 again: Turn off relay 1 (disconnect B and C, connect A and B) … Press button 8: Turn on relay 8 (connect B and C, disconnect A and B) Press button 8 again: Turn off relay 8 (disconnect B and C, connect A and B)
2) Learning Momentary control mode: When the receiver is in the status of LEARNING, press button 2 of the remote control. Control mode Momentary (Channel 1~8): Press and hold -> On; Release -> Off. Press and hold button 1: Turn on relay 1 (connect B and C, disconnect A and B) Release button 1: Turn off relay 1 (disconnect B and C, connect A and B) … Press and hold button 8: Turn on relay 8 (connect B and C, disconnect A and B) Release button 8: Turn off relay 8 (disconnect B and C, connect A and B)
3) Learning Latched control mode: When the receiver is in the status of LEARNING, press button 3 of the remote control. Control mode Latched (Channel 1~8): Press -> On, other relays Off; Press other button -> Off. Press button 1: Turn on relay 1 (connect B and C, disconnect A and B) Turn off other relay (disconnect B and C, connect A and B) … Press button 8: Turn on relay 8 (connect B and C, disconnect A and B) Turn off other relay (disconnect B and C, connect A and B)
4) Learning Toggle (Channel 1~4) + Momentary (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button 4 of the remote control.
5) Learning Toggle (Channel 1~4) + Latched (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button 5 of the remote control.
6) Learning Momentary (Channel 1~4) + Latched (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button 6 of the remote control.
7) Learning Latched (Channel 1~4 interlocked; Channel 5~8 interlocked) control mode: When the receiver is in the status of LEARNING, press button 7 of the remote control.
8) Learning Toggle control mode (Channel 1~6) + All On / Off (Channel 7/8): When the receiver is in the status of LEARNING, press button 8 of the remote control. Press button 7: Turn on all 8 relays Press button 8: Turn off all 8 relays
Package Include:
1 x Receiver: S8CA-DC09 / S8CA-DC12 / S8CA-DC24 (8 Channel / 8 Control Modes)
