Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  3000M-5000M Long Range Remote Control Kits >>  1 Channel AC & DC >>  DC Super-far distances 5000m 1-channel 433.92MHz Remote Control Kit with External Telescopic Antenna

Stay In Touch

DC Super-far distances 5000m 1-channel 433.92MHz Remote Control Kit with External Telescopic Antenna


Price: Starting at: US $125.00

Add to Cart:    Write Review

  • Model: 0020685 (S1UW-DC12-ANT3+CC-1/CC-2)

Please Choose:



















Feature:
  • Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
  • Wireless control, easy to install.
  • Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
  • Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminal is NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to it.
  • With wired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
  • With the external antenna, it can have a further working range.
  • Design with low-power and high-speed CMOS technology.
  • You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
  • Wireless RF signal can pass through walls, floors, doors or windows.
  • With reverse power protection and over current protection.
  • Reliable control: The receiver only works with the transmitter which use same code.
  • One/several transmitters can control one/several receivers simultaneously.
  • You can use two or more units in the same place.

Feedback function:
  • Can let the user know whether he/she had already connect the transmitter and receiver successfully in such a long distance.
  • Two-way working mode: When you press the remote control to send RF signal to the receiver, if the receiver has been successfully triggered or operated, the receiver will immediately transmit a RF feedback signal to the remote control. Then the remote control will send out a buzzing sound to inform you that the receiver has been successfully operated.

Receiver Parameters:
  • Model No.: S1UW-DC06-ANT3 / S1UW-DC09-ANT3/ S1UW-DC12-ANT3 / S1UW-DC24-ANT3
  • Power Supply (Operating Voltage): DC6V (S1UW-DC06-ANT3), DC12V±1V (S1UW-DC12-ANT3), DC9V±1V (S1UW-DC09-ANT3), DC24V±1V (S1UW-DC24-ANT3)
  • Output: Relay output (Normally open and normally closed)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • Working Frequency: 433.92MHz
  • Channel: 1 CH
  • Control Modes: Toggle, Momentary, Latched
  • Static Current: ≤6mA
  • Maximum Working Current: 10A / each channel
  • PCB size: 90mm x 59mm x 18mm
  • Case size: 100mm x 68mm x 50mm

Matching Transmitters:
  • This receiver only works with 5000m transmitters, such as model CC-1 / CC-2 / CC-4 (5000M), or CCW-1 / CCW-2 / CCW-3 / CCW-4 (5000M, waterproof). 
  • When you set the receiver in toggle mode or momentary mode, it should work with single button transmitter, such as model CC-1 (5000m), or CCW-1  (5000m, waterproof). When you set the receiver in latched mode, it should work with two buttons transmitter, such as model CC-2 (5000m),CCW-2  (5000m, waterproof).

Working Range:
  • Super long range, with a transmitter (such asCC-2) to form a complete set, the maximum working distance can reach 5000M in an open ground. 
  • The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.

External Telescopic Antenna:
  • Length of external telescopic antenna: 108mm / 445mm (stretch)
  • With SMA connector.
  • If you stretches the external telescopic antenna, it can have a further working range.

Transmitters:
  • Longest distance, two-way model with feedback function.
  • With a receiver to form a complete set, the distance can reach 5000m which is the longest distance of the transmitter.
  • Two-way model: when the receiver gets the signal of transmitter, it will immediately send a return signal to the transmitter.
  • When the transmitter receives the feedback signal of receiver, it will exude a buzzing sound.
  • Feedback function: can let the user know whether he/she had already connect the transmitter and receiver successfully in such a long distance.
  • Use Spread Spectrum Communication Technology that can highly improve anti-interference capacity.
  • America imported chips for ensuring reliability and assuring the high quality of the products.
  • Uses: Household control products, agricultural control products and industrial control products. Wireless remote control products on land, water and air, especially in a long distance, such as farm, pasture, offshore unmanned operation, field call, remote security alarm.

Control/Transmitter                 

0021060 (CC-1)        

0021061 (CC-2)                 

0021062 (CC-4)               

Button                                  

1                      

2                             

4                               

Button Symbol                  

No Symbol              

Big Button,                 Small Button                  

A, B, C, D            

Shell Color                             

Deep Blue                                                      

Unit Size                              

135mm x 42mm x 25mm                                        

Weight                                   

90g                                                              

Operating Voltage                            

9V (1 x 6F22 -9V battery, can be used for 12 months. Please switch on the control/transmitter when using it and switch it off when you don’t use it)                                                                        

Working Current                               

65 mA/16mA (transmit / receive a signal)                         

Standby Current                              

5μA                                                                 

Operating Frequency                         

433.92MHz                                                        

Transmitting Distance                        

5000m (theoretically)                                           

Operating Temperature                            

-10 ° C to +70 ° C                                                   

Feedback indication                     

Buzzing Sound                                                     

Encoding Type                                      

Custom Code                                                        

Modulation Mode               

FSK+LORA                                                      


Notice:
  • Those transmitters can be used only with 5000m series RF receivers, like model S1PUW-DC12-ANT2, S2PUW-DC12-ANT2, S1PUW-AC220-ANT2, S2PUW-AC220-ANT2, S4PUW-DC12-ANT2, S4PUW-AC220-ANT2, ect. For example, if you choose to set Toggle mode or Momentary mode with 1 channel receiver (S1PUW-DC12-ANT2 or S1PUW-AC220-ANT2), you just need to use one button transmitter (CC-1) to control it. Otherwise, if you choose to set Latched mode, you should use two buttons transmitter (CC-2) to control receiver. If you choose to set Toggle mode or Momentary mode with 2 channels receiver (S2PUW-DC12-ANT2 or S2PUW-AC220-ANT2), you can use two buttons transmitter (CC-2) to control it. Otherwise, if you choose to set Latched mode, you can use four buttons transmitter (CC-4) to control receiver. If you choose to set Toggle mode or Momentary mode with 4 channels receiver (S4PUW-DC12-ANT2 or S4PUW-AC220-ANT2), you need to use four buttons transmitter (CC-4). 

Usage:
  • The receiver can be used to control both DC 0~28V and AC 110~240V equipments.

Notice: 
  • The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals B and C are Normally Open; Terminals A and B are Normally Closed.

Wiring:
If you want to control a DC 12V lamp, do as following:
  • 1) Connect the positive pole of DC power supply to terminal “L / +”, and connect the negative pole of DC power supply to terminal “N / -”.
  • 2) Connect terminal C to the positive pole of DC power supply, connect terminal B to the positive pole of DC lamp, and connect the negative pole of DC lamp to the negative pole of DC power supply.

If you want to control an AC 220V lamp, do as following:
  • 1) Connect the positive pole of DC power supply to terminal “L / +”, and connect the negative pole of DC power supply to terminal “N / -”.
  • 2) Connect terminal C to the live wire of AC power supply, connect terminal B to one side of AC lamp, and connect another side of AC lamp to the neutral wire of AC power supply.

Setting different control modes:
  • Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation): 
  • Setting control mode Toggle: Turn on the first bit of the dip switch.
  • Control mode Toggle (with transmitter CC-1): Press -> On; Press again -> Off.
  • Press the button of the transmitter: Turn on the relay (connect B and C, disconnect A and B), the lamp is on.
  • Press the button again: Turn off the relay (disconnect B and C, connect A and B, the lamp is off.

  • Setting control mode Momentary: Turn on the first and the second bits of the dip switch. 
  • Control mode Momentary (with transmitter CC-1): Press and hold -> On; Release -> Off.
  • Press and hold button of the transmitter: Turn on the relay (connect B and C, disconnect A and B), the lamp is on.
  • Release the button: Turn off the relay (disconnect B and C, connect A and B, the lamp is off.

  • Setting control mode Latched: Turn on the second bit of the dip switch.
  • Control mode Latched (with transmitter CC-2): Press button 1 -> On; Press button 2 -> Off.
  • Press the big button of the transmitter: Turn on the relay (connect B and C, disconnect A and B), the lamp is on.
  • Press the small button of the transmitter: Turn off the relay (disconnect B and C, connect A and B, the lamp is off.

Wired control terminals:
  • The receiver has manual control terminals, you can connect external devices, sensors, or manual switches to control the receiver.
  • 1) Signal input:
  • You can connect external devices (with low level output signal) to manual terminals 3 (Signal -) and terminal 1 (Signal +), then the external device’s output signal can control the receiver.
  • When the external device outputs low level signal to manual terminal 1 and terminal 3, turn on the relay. (connect B and C, disconnect A and B), the lamp is on.
  • When the external device stops to output signal, turn off the relay. (disconnect B and C, connect A and B, the lamp is off.
  • 2) The manual switches:
  • You can connect manual switch to terminals 1 and 3, and then you can use this manual switch to control the receiver.
  • When connect terminals 1 and 3, turn on the relay. (connect B and C, disconnect A and B), the lamp is on.
  • And when disconnect terminals 1 and 3, turn off the relay (disconnect B and C, connect A and B, the lamp is off.

Setting feedback function: 
  • If you want to have a feedback function: Turn on the third bit of the dip switch.
  • When the receiver gets the signal of transmitter, it will immediately send a return signal to the transmitter. When the transmitter receive the feedback signal of the receiver, the transmitter will exude a buzzing sound like “D~” which means it receive the feedback signal successfully.

How to pair the transmitter to the receiver:
  • 1) Press the learning button of receiver for 1- 2 seconds; signal LED on the receiver is on. The receiver enters into status of LEARNING. 
  • 2) Press any one button on transmitter, if signal LED flashes twice, it means learning is successful. 
  • 3) The receiver can learn several transmitters with different codes.

Delete all transmitters:
  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver until signal LED flashes three times. That means all stored codes have been deleted successfully.

Package Include:
  • 1 x Receiver
  • 1 x Transmitter
  • 1 x User manual
Download the User Manual: Wireless Receiver,  Remote Controller
Ask A Question
* Required information

*
*
ngub
*