Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
Package Include:
1 x Receiver: S1X-DC-ANT3
2 x Remote: C-2
1 x Electric solenoid valve
1 x Power adapter: DC12V/3A or DC24V/3A
1 x User manual
Feature:
Application: It can be used in industry automation, agriculture automation
and home automation, such as factory, house, farm, pasture, vehicle, ship,
offshore operation, aerial vehicle, field call, etc. It can remote control
equipments on land, water and air, such as remote control lights, sirens,
locks, motors, fans, winches, blinds, linear actuators, doors, windows,
electric solenoid valves, security alarm, business signs and various
devices.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it
can be installed outdoors.
DC Power Output: It can control DC equipment with voltage12V / 24V.
With wired control terminals: You can connect sensors, limit switches,
manual switches or external devices to control the receiver.
You can turn on/ off the receiver with transmitter (remote control) from any
place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver: Model No.:S1X-DC-ANT3
Channel: 1 CH
Power Supply (Operating Voltage): DC12V±1V (S1X-DC12) or DC24V±1V (S1X-DC24)
Output: DC12V (S1X-DC12) or DC24V (S1X-DC24)
Control Modes: Self-locking, Momentary, Interlocking
Working Frequency: 433MHz
Coding Type: Fixed code
Coding Setting: By learning
Maximum Working Current: 10A
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm
Transmitter:
Model No.: C-2
Shell color: white
Channel: 2 CH
Remote Control Distance: 100m / 300ft (theoretically)
Encode: Fixed code by Soldering
Unit size: 58mm x 39mm x 16mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Parameters:
Wattage: 24W
Working Voltage: DC12V / DC24V
Type: normally closed (power on, solenoid valve open; power off, solenoid
valve close)
Working Temperature: -5℃~100℃
Operating Pressure: 0~1.0Mpa (0~10kg/cm²)
Material of valve body and coil: 100% Brass
Usage: water, air, diesel, gas, low viscosity fluids
Pipe size
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1.2"
1.5"
2"
Thread type
G1/8"
G1/4"
G3/8"
G1/2"
G3/4"
G1"
G1.2"
G1.5"
G2"
Internal Orifice
9MM
12MM
15MM
20MM
25MM"
32MM"
40MM"
45MM"
58MM"
Usage:
Setting different control modes (We have set the receiver as Self-locking mode
before delivery. If you want to use other modes, do as following):
1) Setting control mode Self-locking: Only connect Jumper-2.
Press button 1: Turn on the relay, terminal OUT 1 outputs DC power. Electric
solenoid valve work.
Press button 1 again: Turn off the relay, terminal OUT 1 no output. Electric
solenoid valve stops work.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay, terminal OUT 1 outputs DC power.
Electric solenoid valve work.
Release button 1: Turn off the relay, terminal OUT 1 no output. Electric
solenoid valve stops work.
3) Setting control mode Interlocking: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay, terminal OUT 1 outputs DC power. Electric
solenoid valve work.
Press button 2: Turn off the relay, terminal OUT 1 no output. Electric solenoid
valve stops work.
Wired control terminals: The receiver has wired control terminals, you can connect external devices,
sensors, limit switches or manual switches to trigger the receiver.
1) By low level signal:
You can connect external devices (with low level output signal) to trigger the
receiver.
When external device outputs low level signal to terminals 1 (Signal +) and
terminal 3 (Signal -), terminal of OUT 1 output DC power. Electric solenoid
valve work.
When external device stops to output signal, terminal of OUT 1 stop outputting.
Electric solenoid valve stops work.
2) By NO/NC contact:
You can connect manual switches (with NO/NC contact) to trigger the receiver.
When connect terminals 1 and 3 by manual switch, terminal of OUT 1 output DC
power. Electric solenoid valve work.
When disconnect terminals 1 and 3 by manual switch, terminal of OUT 1 stop
outputting. Electric solenoid valve stops work.