Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  Wireless Vibrator / Reminder >>  DC1.5V : RF Wireless Remote Control Vibrator Reminders-Receiver and Four-button Transmitter with waterproof

Stay In Touch

DC1.5V : RF Wireless Remote Control Vibrator Reminders-Receiver and Four-button Transmitter with waterproof


Price: Starting at: US $36.00

Add to Cart:    Write Review

  • Model: 0020159 (Z-02+1CWB-4)

Please Choose:










Feature:
  • Wireless control.
  • You can control the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency:315MHz

Receiver:
  • Model No.: Z-02
  • Mode: Vibration
  • Decode: Learning code
  • Power Supply: 1 x AAA 1.5V Battery (included)
  • Size: 58mm x 35mm x 14mm

Transmitter:
  • Model No.: CWB-4
  • Waterproof
  • Shell Color: Black
  • Channel/Button: 4
  • Button Symbol: A, B, C, D
  • Operating Voltage: 6V (2 x CR2016 -3V button cell batteries,, can be used for 12 months)
  • Operating Current: 5mA
  • Operating Frequency: 315Mhz / 433Mhz
  • Encoding Chip: PT2260/ PT2262 / PT2264 
  • Encoding Type: Fixed code by soldering, up to 6561 codes
  • Transmitting Distance: 50m / 150ft (theoretically) 
  • The distance of 50m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 50m.
  • Modulation Mode: ASK
  • Operating Temperature: -20 ° C to +70 ° C 
  • Unit Size: 56mm x 32mm x 12mm
  • Weight: 20g

Usage:
  • Press the button A of transmitter, the receiver vibrates one time.
  • Press the button B of transmitter, the receiver vibrates two times.
  • Press the button C of transmitter, the receiver vibrates three times.
  • Press the button D of transmitter, the receiver vibrates four times.

Learning the button of remote control:
  • 1) Press and hold the learning button of the receiver for about 1~2 seconds, then release the button when LED flashes one time, the receiver is in the status of Learning.
  • 2) Press button A of remote control within 10 seconds, if LED light is on then off, it means Learning is successful.
  • If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.
  • Press button D of remote control within 10 seconds, if LED light is on then off, it means Learning is successful.
  • If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.
  • 3) The receiver can learn eight buttons on the remote control.

Delete all transmitters:
  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver until signal LED is on to off; release the button. That means all stored codes have been deleted successfully.

Package Include:
  • 1 x Receiver: Z-02 (Vibration)
  • 1 x Transmitter: CWB-4
  • 1 x User manual
Ask A Question
* Required information

*
*
xxsi
*