Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  RF Remote / Transmitter >>  CB Series 1000M / 3000Ft >>  Long Range Wireless Remote Control 1000M With Extended Input Wires

Stay In Touch

Long Range Wireless Remote Control 1000M With Extended Input Wires


Price: Starting at: US $40.00

Add to Cart:    Write Review

  • Model: 0021044 (CB-2V)

Please Choose:







Manual

Product Description: 

  • Model No.: 0021044 (CB-2V)
  • With Extended Input Wires
  • Triggering method: DC power 5-28V input
  • Shell Color: Grey
  • Channel/Button: 2
  • Button Symbol: big button, small button
  • Operating Voltage: 
  • 9V (1 x 6F22 -9V battery, can be used for a week, if you want a longer working time, please use a 9V power adapter.)
  • Operating Current: 30mA
  • Operating Frequency: 315Mhz
  • Encoding Chip: PT2262 / PT2264 / SC2262
  • Encoding Type: Fixed code by soldering, up to 6561 codes
  • Transmitting Distance: 1000m / 3000ft (theoretically) 
  • The distance of 1000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 1000m.
  • If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
  • Modulation Mode: ASK
  • Operating Temperature: -20 ° C to +70 ° C 
  • Unit Size: 135mm x 42mm x 25mm
  • Weight: 95g
    •  

Uses: 

  • garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

     

Controlling the device by pressing buttons on the transmitter:

  • Press big button on the transmitter -> On, the device controlled by the receiver starts to work;
  • Press small button on the transmitter -> Off, the device controlled by the receiver stops working.

Controlling the device by inputting or no inputting DC 5~28V power to red wire and black wire of the transmitter:

  • When it has DC 5~28V power input for red wire and black wire of the transmitter, the transmitter will be triggered and then it will send an RF signal of "ON" to turn on the receiver, the device controlled by the receiver will starts to work.
     
     
  • When it does not have DC 5~28V power input for red wire and black wire of the transmitter, the transmitter will be triggered and then it will send an RF signal of "OFF" to turn off the receiver, the device controlled by the receiver will stops working.

 


 Add Receiver:

  • This transmitter can remote control different receivers, including :
  • S1L-DC12 (DC, Relay Output, 1 Channel, Latched Control Mode), 
  • S1XL-DC12 (DC, Power Output, 1 Channel, Latched Control Mode), 
  • S1U-DC12 (DC, Relay Output, 1 Channel, Momentary, Latched and Toggle Control Mode), 
  • S1X-DC12 (DC, Power Output, 1 Channel, Momentary, Latched and Toggle Control Mode),
  • S1PX DC12 (DC, 1 Channel, 30A, High Power, Power Output, Momentary, Latched and Toggle Control Mode), 
  • S1PU-DC12 (DC, 1 Channel, 30A, High Power, Relay Output, Momentary, Latched and Toggle Control Mode), 
  • S1L-AC220 (AC, Relay Output, 1 Channel, Latched Control Mode), 
  • S1U-AC220 (AC, Relay Output, 1 Channel, Momentary, Latched and Toggle Control Mode), 
  • S1X-AC220 (AC, Power Output, 1 Channel, Momentary, Latched and Toggle Control Mode), 
  • S1PX-AC220 (AC, 1 Channel ,30A, High Power, Power Output, Momentary, Latched and Toggle Control Mode).

 

     
Ask A Question
* Required information

*
*
nsti
*