This DC RF Motor Remote Controller features forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. With time delay function, the working time of positive/reversal rotation can be adjusted from 10 to 60 seconds. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V.
Control motors of of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V.
You can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in same place, you can set them with different codes.
Power Supply (Operating Voltage): DC12V±1V (S1FD-DC12), DC9V±1V (S1FD-DC09), DC24V±1V (S1FD-DC24)
Working Voltage Range of Relay: DC12V
Case Size: 110mm x 65mm x 40mm
Maximum Current: 5A
Model No.: CA-4
Remote Control Distance: 50m / 150ft (theoretically)
Encode: Fixed code by soldering
Unit size: 88mm x 46mm x 20mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Connect power supply DC 12V to the terminals “IN”. Connect DC motor to the “OUT”. You can exchange the output wires of motor to change the rotating direction of motor.
Press button ▲: Light 1 shines, terminal “OUT” output ＋ DC 12V (1: ＋, 2: －), motor rotates in the positive direction, and it will stop after a certain delay time. Press button ▼: Light 2 shines, terminal “OUT” output － DC 12V (1: －, 2: ＋), motor rotates in the reversal direction, and it will stop after a certain delay time.
The delay time of positive / reversal rotation can be adjusted from 10 to 60 seconds. Turn R1/R2 clockwise, prolong the delay time. Turn R1/R2 anti-clockwise, shorten the delay time. When you press button ▲ or button ▼, the motor starts to rotate; it will stop after the delay time is expired.
When the rotation is overdone, if the restrictive switch S1 or S2 is activated, the motor will stop automatically.
After press button ▲, you must press button ■ to stop motor firstly, and then press button ▼.
If you pull out the Jumper of the receiver, you can press directly button ▼ after press button ▲.
1 x Receiver: S1FD-DC09 / S1FD-DC12 / S1FD-DC24 (Inversion Control Mode)
1 x Transmitter: CA-4
1 x User manual
The distance of 50m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance could not reach 50m. If you need longer range, you can choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here to link to; Or you can add the External Extend Antenna (model:0020909 ) on the receiver for improve the range - Click here to link to.