Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  RF Remotes / Transmitters >>  Input Trigger Remotes >>  Long Range Wireless Remote Control 1000M With Extended Control Wires

Stay In Touch

Long Range Wireless Remote Control 1000M With Extended Control Wires


Price: US $40.00

Add to Cart:    Write Review

  • Model: 0021045 (CB-2N)

Please Choose:





Product Description:
Model No.: 0021045 (CB-2N)
With Extended Control Wires
Triggering method: connection and disconnection of two wires.
Shell Color: Grey
Channel/Button: 2
Button Symbol: big button, small button
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for a week, if you want a longer working time, please use a 9V power adapter.)
Operating Current: 10mA
Operating Frequency: 315MHz
Encoding Chip: PT2262 / PT2264 / SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 1000m / 3000ft (theoretically)
The distance of 1000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 1000m.
If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 135mm x 42mm x 25mm
Weight: 95g
Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.
 
Usage:
The receiver paired to this transmitter can be turned on / off by pressing buttons on the transmitter, connecting the red wire and black wire of the transmitter or connecting the red wire and black wire to a switch/sensor.
 
Controlling the receiver by pressing buttons on the transmitter:
Press big button on the transmitter -> On, the device controlled by the receiver starts to work;
Press small button on the transmitter -> Off, the device controlled by the receiver stops working.
 
Controlling the receiver by connecting red wire and black wire of the transmitter:
When connecting the red wire and black wire of this transmitter, the transmitter will be triggered and then it will send an RF signal of "ON" to turn on the receiver, the device controlled by the receiver will starts to work.
When disconnecting the red wire and black wire of this transmitter, the transmitter will be triggered and then it will send an RF signal of "OFF" to turn off the receiver, the device controlled by the receiver will stops working.
 
The transmitter can also be triggered by connecting the red wire and black wire to a switch or a sensor, but the switch or sensor must be normally open (NO).
 
Add Receiver:
This transmitter can remote control different receivers, including :
 

Power Output: Latched Control Mode

0020415

S1XL-DC12

0020423

S1X-DC12

0020391

S1X-AC220

0020088

S1L-AC220

0020393

S1X-AC220-ANT3

0020052

S1PX-DC12-ANT3

0020053

S1PX-AC220-ANT3

Relay Output: Latched Control Mode

0020042

S1L-DC12

0020330

S1U-AC220

0020046

S1PU-DC12

0020275

S1PU-AC220

0020466

S1U-AC220-ANT3

0020302

S1PU-DC12-ANT3

0020488

S1PU-AC220-ANT3

How to set up the 8-bits code of the transmitter:
1. Open the transmitter shell, then you will see the circuit board. There are two rows pads and one row of chip feet on the back side.
2. The upper row of pads is “L” side, and the lower row of pads is “H” side.
3. If solder the middle row of chip feet to the “L” side, it is code 1. If solder the middle row of chip feet to the “H” side, it is code 2. Don’t solder to any side, it is code 0.
4. The 8-bits code order is from left to right (from A1 to A8).
5. Here is an example, the 8-bits code in the picture is 00010121, solder as the following way:
6. Code 0: don’t solder any side, like A1A2A3A5.
7. Code 1: solder to the “L” side, like A4A6A8.
8. Code 2: solder to the “H” side, like A7.
Ask A Question
* Required information

*
*
wcwv
*