Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  French  


Home >>  Mini Size Remote Kits >>  Normally Closed / Normally Open DC4~12V 1 CH Wireless Mini Remote Equipment with Momentary / Latched Control Mode

Stay In Touch

Normally Closed / Normally Open DC4~12V 1 CH Wireless Mini Remote Equipment with Momentary / Latched Control Mode


Price: US $25.00

Add to Cart:    Write Review

  • Model: 0020643 (S1US-DC & 1C-2)

Please Choose:


















Feature:
  • Wireless control, easy to install
  • Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with voltage AC110~240V or DC0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use an 8-bit microcontroller with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/ several transmitters can control one/ several receivers simultaneously.
  • If you use one or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz

Receiver:
  • Model No.: S1US-DC(4~12V)
  • Channel: 1 CH
  • Control Modes: Momentary, Latched, Toggle
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC 4~12V
  • Output: Relay output (Normally open and normally closed)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • PCB Size: 25mm x 11mm x 7mm
  • Static Current: ≤7mA
  • Maximum Working Current of Relay: 2A
  • Receiver Working Current: 30mA

Transmitter:
  • Model No.: C-2
  • Channel: 2 CH
  • Remote Control Distance: 50m / 150ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit Size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:
  • Setting different control modes (We have set the receiver as Latched control mode before delivery. If you want to use other control modes, do as following operation):

  • Setting control mode Toggle: Do not connect
  • Control mode Toggle: Press -> On; Press again -> Off.
  • Press button 1: Turn on the relay (connect B and C, disconnect A and B)
  • Press button 1 again: Turn off the relay (disconnect B and C, connect A and B)

  • Setting control mode Momentary: Connect terminal 1 and 2
  • Control mode Momentary: Press and hold -> On; Release -> Off.
  • Press and hold button 1: Turn on the relay (connect B and C, disconnect A and B)
  • Release button 1: Turn off the relay (disconnect B and C, connect A and B)

  • Setting control mode Latched: Connect terminal 3 and 4
  • Control mode Latched: Press -> On, other relays Off; Press another button -> Off.
  • Press button 1: Turn on the relay (connect B and C, disconnect A and B)
  • Press button 2: Turn off the relay (disconnect B and C, connect A and B)

How to pair the transmitter to the receiver:
  • 1) Connect setting terminals until LED on; disconnect setting terminals, the receiver enters into status of LEARNING.
  • 2) Press and hold button 1 on remote control, LED flash once, release button 1; then press and hold button 2 on remote control, LED flash once again; finally, press any one button on remote control. If LED off, it means learning is successful.
  • 3) The receiver can learn 6 buttons with different codes.

Delete all transmitters:
  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: connect setting terminals until LED on then off; that means all stored codes have been deleted successfully.

Package Include:
  • 1 x Receiver: S1US-DC(4~12V) (1 Channel / Three Control Modes)
  • 1 x Transmitter: C-2
  • 1 x User manual

Ask A Question
* Required information

*
*
mful
*