Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
Package Include:
1 x Receiver: S1X-AC-ANT3
1 x Transmitter: CB-2V
1 x User manual
Feature:
Application: This type of wireless remote control device can use a DC
voltage signal or a DC device to wirelessly control another AC device, and
it can be used for synchronous wireless control of various home, industrial
or agricultural equipments, such as wireless control of the warning host and
the warning horn, wireless control of the lights, wireless synchronization
control of the equipments and so on.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it
can be installed outdoors.
Universal input: Support voltage of AC110V (100V~120V), widely used in US,
Canada... and voltage of AC220V (200V~240V), used in UK, France...
AC Power Output: It can control AC equipment with voltage 110V / 120V / 220V
/ 240V AC.
With wired control terminals: You can connect sensors, limit switches,
manual switches or external devices to control the receiver.
With the external antenna, it can have a further working range.
You can turn on/ off the receiver with transmitter (remote control) from any
place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection. One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No.: S1X-AC-ANT3
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Wire range for the terminals: 22-12 AWG
Working Frequency: 315MHz
Channel: 1 CH Control Modes: Interlocking,
Static Current: ≤6mA
Maximum Working Current: 10A
PCB size: 88 x 80 x 18 mm (3.5 x 3.1 x 0.7 inches)
Case size: 115 x 90 x 55 mm (4.5 x 3.6 x 2.2 inches)
External Telescopic Antenna (ANT3) for the receiver:
Length of external telescopic antenna: 108mm / 445mm (stretch)
With SMA connector.
If you stretches the external telescopic antenna, it can have a further
working range.
Matching Transmitters For Receiver:
The receiver can work with different transmitters, such as model C-2 (100M),
CWB-2 (50M, waterproof), CP-2 (500M), or CB-2 (1000M) etc.
Transmitter Parameters:
Model No.: CB-2V
With Two Input Wires: Trigger by 5~28V DC Signal
Channel/Button: 2
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for a week, if you
want a longer working time, please use a 9V power adapter.)
Operating Current: 30mA
Operating Frequency: 315 MHz
Transmitting Distance: 1000m / 3000ft (theoretically)
It has an on / off button on the side.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 135mm x 42mm x 25mm
The working principle:
Transmitter CB-2V is a special remote control with DC voltage signal
trigger. It has 2 input lines for connecting an DC power or DC device, such
as DC lamps, DC motors; or connecting a device with DC voltage output, such
as warning host, cable detectors, various sensors, Programmable Logic
Controllers and so on. The transmitter can be combined with different types
of receivers to form a wireless control system that can be used to
wirelessly control another AC device through a DC signal or a DC device.
Working process:
1. Connect a DC device A to the two input lines of the transmitter; connect
the other device B to the receiver.
2. When the device A outputs the DC voltage to the transmitter, the
transmitter automatically emits an "ON" wireless signal, which is equivalent
to the function of the button "ON" on the transmitter. When the receiver
receives the wireless signal, it will activate its relay to turn on the
connected device B.
3. When the device A stops outputting the DC voltage to the transmitter, the
transmitter automatically emits an "OFF" wireless signal, which is
equivalent to the function of the button "OFF" on the transmitter. When the
receiver receives the wireless signal, it will deactivate its relay to turn
off the connected device B.
Working Range:
Super long range, with this transmitter (such as CB-2V) to form a complete
set, the maximum working distance can reach 2000M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in
an open ground, no barriers, no any interference. But in the practice, it
will be hindered by trees, walls or other constructions, and will be
interfered by other wireless signals. Therefore, the actual distance may not
reach this maximum working distance.
Usage:
The receiver can be used to control AC 110~240V equipments.
A. Wiring:
If you want to control an AC 220V lamp, do as following:
1) Connect the live wire of AC power supply to terminal “L / +” of INPUT,
and connect the neutral wire of AC power supply to terminal “N / -” of
INPUT.
2) Connect one side of AC lamp to terminal "L / +" of OUTPUT, and connect
another side of AC lamp to terminal "N / -" of OUTPUT.
B. Operation:
1) Controlling the device by the buttons on the transmitter (CB-2V):
Press button A of the transmitter: Terminals “OUT1”of the receiver outputs
AC power, and the device is turned on.
Press button B of the transmitter: Terminals “OUT1” of the receiver stops
outputting, and the device is turned off.
2) Controlling the device by the input wires of the transmitter:
When connect 5~28V DC signal to the input wire (the red wire and black wire)
of the transmitter, the transmitter sends an RF signal "ON" to trigger the
receiver, the output terminals "OUT1" outputs AC power, and the device is
turned on.
When disconnect 5~28V DC signal to the input wire, the transmitter sends
another RF signal "OFF" to trigger the receiver, the output terminals "OUT1"
stops outputting, and the device is turned off.
C. Wired control terminals:
The receiver has wired control terminals, you can connect external devices,
sensors, limit switches or manual switches to trigger the receiver.
1) By low level signal:
You can connect external devices (with low level output signal) to trigger
the receiver.
When external device outputs low level signal to terminals 1 (Signal +) and
terminal 3 (Signal -), terminal of OUT 1 output AC power, and the device is
turned on.
When external device stops to output signal, terminal of OUT 1 stop
outputting, and the device is turned off.
2) By NO/NC contact:
You can connect manual switches (with NO/NC contact) to trigger the
receiver.
When connect terminals 1 and 3 by manual switch, terminal of OUT 1 output AC
power, and the device is turned on.
When disconnect terminals 1 and 3 by manual switch, terminal of OUT 1 stop
outputting, and the device is turned off.