Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English French German


X
Hi, I'm Tom. Welcome to our shop, Carymart offers you the premium rf remote control equipment. We suggest you reading our FAQs before making your decision. If you have any other question, please contact us. We will reply you as soon as possible.

SKYPE
Contact Us


Home >>  DC Output Remote Switches >>  1CH DC 6V 9V 12V 24V Output >>  Long Range 30A DC Power Input Output Waterproof Wireless Remote Control Kit

Long Range 30A DC Power Input Output Waterproof Wireless Remote Control Kit


Price: US $60.00

  • Model: 0020058 (S1PX-DC-ANT3 & CB-1/CB-2)

Please Choose:












Qty:    



Feature:
  • Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
  • Wireless control, easy to install.
  • Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
  • DC Power Output: It can control DC equipment with voltage DC 6V / 9V / 12V / 24V.
  • High Power: Each channel can work at maximum current 30A, such as 360W/12V, 180W/6V, 270W/9V, 720W/24V.
  • With wired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
  • With the external antenna, it can have a further working range.
  • Design with low-power and high-speed CMOS technology.
  • You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
  • Wireless RF signal can pass through walls, floors, doors or windows.
  • With reverse power protection and over current protection.
  • Reliable control: The receiver only works with the transmitter which use same code.
  • One/several transmitters can control one/several receivers simultaneously.
  • You can use two or more units in the same place.

Receiver Parameters:
  • Model No.: S1PX-DC06-ANT3 / S1PX-DC09-ANT3 / S1PX-DC12-ANT3 / S1PX-DC24-ANT3
  • Power Supply (Operating Voltage): DC6V (S1PX-DC06-ANT3), DC9V±1V (S1PX-DC09-ANT3), DC12V±1V (S1PX-DC12-ANT3), DC24V±2V (S1PX-DC24-ANT3)
  • Output: DC6V (S1PX-DC06-ANT3), DC9V (S1PX-DC09-ANT3), DC12V (S1PX-DC12-ANT3), DC24V (S1PX-DC24-ANT3)
  • Working Frequency: 433MHz
  • Channel: 1CH
  • Control Modes: Self-locking, Momentary, Interlocking
  • Static Current: ≤6mA
  • Maximum Working Current: 30A / each channel
  • PCB size: 90mm x 59mm x 18mm
  • Case size: 100mm x 68mm x 50mm
  • Work with Fixed code transmitters or Learning code transmitters.

Matching Transmitters:
  • The receiver can work with different transmitters, such as model C-1 / C-2 (100M), CWB-1 / CWB-2 (50M, waterproof), CP-1 / CP-2/CV-2 (500M), or CB-1 / CB-2 (1000M), CBW-1/CBW-2 (1000M, waterproof) etc. 
  • When you set the receiver in toggle or momentary mode, it should work with single button transmitter, such as model C-1 (100M), CWB-1 (50M, waterproof), CP-1 (500M), or CB-1 (1000M), CBW-1 (1000M, waterproof) etc. When you set the receiver in latched mode, it should work with two buttons transmitter, such as model C-2 (100M), CWB-2 (50M, waterproof), CP-2 (500M), CV-2 (500M), CB-2 (1000M), or CBW-2 (1000M, waterproof) etc.

Working Range:
  • Super long range, with a transmitter (such as CB-2) to form a complete set, the maximum working distance can reach 2000M in an open ground. 
  • The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.

External Telescopic Antenna:
  • Length of external telescopic antenna: 108mm / 445mm (stretch)
  • With SMA connector.
  • If you stretches the external telescopic antenna, it can have a further working range.

Transmitter: 
  • Model No.: 0021023 (CB-1)
  • Shell Color: Grey
  • Channel/Button: 1
  • Button Symbol: no symbol
  • Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
  • Operating Current: 30mA
  • Operating Frequency: 433Mhz
  • Encoding Chip: PT2262 / PT2264 / SC2262
  • Encoding Type: Fixed code by soldering, up to 6561 codes
  • Transmitting Distance: 1000m / 3000ft (theoretically) 
  • The distance of 1000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 1000m.
  • If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
  • Modulation Mode: ASK
  • Operating Temperature: -20 ° C to +70 ° C 
  • Unit Size: 135mm x 42mm x 25mm
  • Weight: 95g
  • Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

Usage:
  • The receiver can be used to control DC 6V / 9V / 12V / 24V equipments. If the power supply of those equipments is DC 12V, you should choose the receiver with same DC 12V version; and if the power supply of those equipments is DC 24V, you should choose the receiver with same DC 24V version.

Wiring:
If you want to control a DC 12V lamp, do as following:
  • 1) Connect the positive pole of DC power supply to terminal “L / +” of INPUT, and connect the negative pole of DC power supply to terminal “N / -” of INPUT.
  • 2) Connect the positive pole of lamp to terminal "L / +" of OUTPUT, and connect the negative pole of lamp to terminal "N / -" of OUTPUT.

Setting different control modes: 
  • Setting different control modes (We have set the receiver as Self-locking control mode before delivery. If you want to use other control modes, do as following operation): 
  • Setting control mode Self-locking: Only connect Jumper-2.
  • Control mode Self-locking (with transmitter CB-1): Press -> On; Press again -> Off.
  • Press button of the transmitter: Output terminal outputs DC power, the lamp is on.
  • Press button again: Output terminal stops outputting, the lamp is off.

  • Setting control mode Momentary: Only connect Jumper-1.
  • Control mode Momentary (with transmitter CB-1): Press and hold -> On; Release -> Off.
  • Press and hold button of the transmitter: Output terminal outputs DC power, the lamp is on.
  • Release button of the transmitter: Output terminal stops outputting, the lamp is off.

  • Setting control mode Interlocking: Do not connect Jumper-1 and Jumper-2.
  • Control mode Interlocking (with transmitter CB-2): Press -> On, Press another button -> Off.
  • Press button A of the transmitter: Output terminal outputs DC power, the lamp is on.
  • Press button B of the transmitter: Output terminal stops outputting, the lamp is off.

Wired control terminals:
  • The receiver has manual control terminals, you can connect external devices, sensors, or manual switches to control the receiver.
  • 1) Signal input:
  • You can connect external devices (with low level output signal) to manual terminals 1 (Signal -) and terminal 2 (Signal +), then the external device’s output signal can control the receiver.
  • When the external device outputs low level signal to manual terminal 1 and terminal 2, turn on the relay. Output terminal outputs DC power, the lamp is on.
  • When the external device stops to output signal, turn off the relay. Output terminal stops outputting, the lamp is off.

  • 2) The manual switches:
  • You can connect manual switch to terminals 1 and 2, and then you can use this manual switch to control the receiver.
  • When connect terminals 1 and 2, turn on the relay. Output terminal outputs DC power, the lamp is on.
  • And when disconnect terminals 1 and 2, turn off the relay. Output terminal stops outputting, the lamp is off.

Package Include:
  • 1 x Receiver
  • 1 x Transmitter
  • 1 x User manual
Download the User Manual: Wireless Receiver,  Remote Controller
Ask A Question
* Required information

*
*
reag
*