2 Channel High Capacity Switch for Linear Actuator Extension and Retracement

Could you tell me the amp load rating for these, as I might have to go with the high capacity switch that can handle an amp load of 30 amps. I am using them to power two linear actuators that have a draw of 20 amps. Maybe the high amp load kit is the correct one?

We recommend this high amp load motor controlling kit (S2PF-DC12+CV-6-2) to you. With high capacity of 30A, it controls DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V.

Connect terminals “+” and “-” to power supply DC12V / 24V; connect terminals “A1? and “A2? to linear actuator motor 1; connect terminals “B1? and “B2? to linear actuator motor 2.

Setting control mode Latched: Do not connect Jumper-1 (CN1) or Jumper-2 (CN2)

Press button ? on the left: linear actuator motor 1 rotates in positive direction

Press button ? on the left: linear actuator motor 1 rotates in reversal direction

Press button ? on the left: linear actuator motor 1 stops

Press button ? on the right: linear actuator motor 2 rotates in positive direction

Press button ? on the right: linear actuator motor 2 rotates in reversal direction

Press button ? on the right: linear actuator motor 2 stops

Setting control mode Momentary: Only connect Jumper-1 (CN1)

Press and hold button ? on the left: linear actuator motor 1 rotates in positive direction

Release button ? on the left: linear actuator motor 1 stops

Press and hold button? on the left: linear actuator motor 1 rotates in reversal direction

Release button ? on the left: linear actuator motor 1 stops

Press and hold button ? on the right: linear actuator motor 2 rotates in positive direction

Release button? on the right: linear actuator motor 2 stops

Press and hold button? on the right: linear actuator motor 2 rotates in reversal direction

Release button ? on the right: linear actuator motor 2 stops