DC&AC Power Output Remote Control System for LED Garden Lights and Swimming Pool Lamps

We recommend the model of dc power output switch (S1X-DC12+2C-2) (12V) or ac power output switch (S1X-AC220+2C-2) (220V).

The remarkable feature of those two switches is power output from relay contact terminals, it means that you can wire your lights to relay contact terminals directly and lights will be on when receivers are power on. The difference between them is that one is dc power output, the other is ac power output. Those two can meet your needs of two kinds power actuated lights. They can remote control motors, fans, electric operated doors/ locks/ windows/ blinds/ winches/ cars or other appliances with DC or AC power actuated other than lights.

The wiring is very easy and convenient.

Wire DC light to “+”&”—” terminals of dc power output switch or wire AC light to “L”&”N” terminals of dc power output switch. (Do as the following wiring diagram)

There are 3 working modes here. They are Toggle/ Momentary/ Latched modes.

Generally speaking, if you want to remote control light, you’d better choose toggle or latched mode.

Setting control mode Toggle: Only connect Jumper-2.

Press button 1: Turn on the relay, terminal OUT outputs DC or AC power.

Press button 1 again: Turn off the relay, terminal OUT no output.

Setting control mode Momentary: Only connect Jumper-1.

Press and hold button 1: Turn on the relay, terminal OUT outputs DC or AC power.

Release button 1: Turn off the relay, terminal OUT no output.

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press button 1: Turn on the relay, terminal OUT outputs DC or AC power.

Press button 2: Turn off the relay, terminal OUT no output.