Hi, I'm Tom. Welcome to our shop, Carymart offers you the premium rf remote control equipment. We suggest you reading our FAQs before making your decision. If you have any other question, please contact us. We will reply you as soon as possible.

FAQ Categories

Account
Shipping
Payment Methods
RF Remote Control
Product Operation And Setup
How to select products->
Products Applications->

Question 51/144

High Capacity 24V Remote Controller for Bow and Stern Thruster in the Boat

Question:

Can I use a radio system for bow and stern thruster in the boat? When pressing the keys on the transmitter, the motors must be supplied with continuous power; and after releasing the keys, the power must be immediately interrupted. I need a 24 volt system.

Answer:

We recommend two long range transmitters (CB-2N) and two high capacity 24V receivers (S1PU-DC24). You can connect one key to two wires of CB-2N, and connect DC 24V power and motor to the receivers S1PU-DC24. When you press and hold the key, the motor will be supplied with continuous power, and after releasing the key, the power will be immediately interrupted.

Wire motor to the normally open terminal A&B. Wire “A” terminal to negative pole of receiver output contact. Wire “B” terminal to positive pole of receiver output contact. And supply 24V power.

This question was added to our store on Wednesday 14 May, 2014.