1 Channel High Power Remote Switch for Pool light Controlling

On my swimming pool I have a switch to ON/OFF the light(2 x300 watt projectors on a single switch). Do you have any solution so I can remotely ON or OFF this pool light?

Our suggestion is that you can use 1 channel AC power&30A output remote switch (Model: 0020059 (S1PX-AC-ANT3 & CB-2). The receiver is AC 100~240V input / output type, the maximum operating current is 30A, and it has a waterproof case and external telescopic antenna, so it can be installed outdoors. This wireless light remote control device in the open area can be achieved as far as 1000~2000 meters working distance.
?

The wiring is very easy. Swimming pool lamp is connected to OUTPUT terminals on the receiver. And supply AC power to "L/+"&"N/-" INPUT terminals of the receiver. You don’t have to supply any current to pool lamp because it can get power from powered receiver.

And you will get a handy transmitter with 2 buttons. We recommend you can set Latched Mode for this controlling. Press button A, turn on pool lamp; press button B, turn off pool lamp.