Question 6/17

AC Wireless Remote Control Electric Solenoid Valves Kits

Introduce AC wireless remote control electric solenoid valves kits' parameters

Kit Model	0020567	0020394	0020689
Picture
Receiver	S1X-AC	S1X-AC-ANT3	S1UW-AC-ANT3
Transmitter	C-2	CB-2	CC-2
Operating Voltage of receiver	Single-phase AC100~240V
Max Working Current of receiver	Toggle, Momentary, Latched
Control Modes
Size of receiver	100mm x 68mm x 50mm	100mm x 68mm x 50mm	115mm x 90mm x 55mm
Size of Transmitter	58mm x 39mm x 16mm	135mm x 42mm x 25mm
Working distance	80M~150M	800M~1000M	3000M~5000M
Waterproof of receiver case	YES
Wired control terminals	With
Feedback function	NO		YES
Antenna of receiver	Built-in ordinary antenna	Telescopic Antenna (ANT3)
Output Type of receiver	DC power output It can be used to control DC12V / 24V equipments. If the power supply of those equipments is DC 12V, you should choose the receiver with same DC 12V version; and if the power supply of those equipments is DC 24V, you should choose the receiver with same DC 24V version.		Relay output (NC/NO or passive output) It is equivalent to a single pole double throw switch, control the external circuit with three terminals (Normally closed, Common, Normally open). When the receiver is not triggered, normally closed terminal and common terminal are connected, normally open terminal and common terminal are disconnected; When the receiver is triggered, normally closed terminal and common terminal are disconnected, normally open terminal and common terminal are connected. It can be used to operate both DC and AC equipments.

This question was added to our store on Saturday 21 April, 2018.