Wireless Remote Control Adjustment the speed Linear Actuators Kits

Kit Model	0020151	0020153	0020503
Picture
Receiver	S1FA-DC12/24	S1FB-DC12	S2PFS-DC12
Transmitter	CP-6 (six buttons)	CP-6 (six buttons)	CV-6-2 (six buttons)
Operating Voltage of receiver	DC12V~30V	DC12V~30V	DC12V   24V
Max Working Current of receiver	8A	30A	30A/ each channel
Control Modes	Latched	Latched	Momentary, Latched
Size of receiver	115mm x 90mm x 40mm	160mm x 100mm x 42mm	200mm x 120mm x 55mm
Working distance	300~500M
Receiver case	Plastic case, no waterproof	Metal case, no waterproof	Plastic case, no waterproof
Quantity of controlled motors	1	1	2
With fuse	YES	YES	NO
With signal input terminals	YES	YES	NO
With restrictive function	YES	YES	NO
Adjust the speed of linear actuator extending and retracting	Through button 4 (speed up) and 6 (slow down) of transmitter, or the adjustable potentiometer of receiver		Through the adjustable potentiometer of receiver

Mainly used for cars, lifting platforms, massage couches, electric beds, medical chairs, electric devices, micro-devices and so on. It can push, pull, lift and descend other devices.

Control Modes
1. Momentary:
Press and hold button5, the linear actuator extending movement. Release button5 , the linear actuator stops.
Press and hold button 6 , the linear actuator retracting movement. Release button 6 , the linear actuator stops.
 
2. Latched:
Press button5 or button 1, the linear actuator extending movement. Press button <
or button 3, the linear actuator stops.
Press button 6 or button 2, the linear actuator retracting movement. Press button <
or button 3, the linear actuator stops.
 
Working Range
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.